ENG-4
Location of controls
1. ALARM 1 BUTTON
2. BUZZER
3. HOUR BUTTON
4. AC 5V JACK
5. BATTERY DOOR
6. LED DISPLAY
7. MINUTE BUTTON
8. TIME /SNOOZE BUTTON
9. ALARM 2 BUTTON
BATTERY BACK-UP
The back-up system ensures that the clock continues to function in the event of a power-cut.
1. Open the battery door on the underside of the apparatus.
2. Insert 2 LR03-type (AAA) 1.5V batteries, polarity as indicated (+/-).
3. Close the battery door.
UNIT POWER SUPPLY
This unit is designed to operate with AC/AC 5V Adaptor.
Insert the small plug of adaptor into the AC Jack.
Insert the AC/AC adaptor into any convenient having 230-240V~AC, 50Hz household outlet in vertical or horizontal
direction.
TO SET THE CLOCK TIME
Press and hold the TIME/SNOOZE button then press HOUR button and MINUTE button to adjust hour and minute
respectively; When HOUR button or MINUTE button is pressed and hold for more than 2 seconds, the digits of hour
or minute shall increase continuously.
TO SET THE ALARM TIME
The Unit provides 2 sets of alarms. The alarm time can be set as following:
1. Press ALARM 1 or ALARM 2 to turn on/off AL1/AL2.
2. Press and hold ALARM 1/ALARM 2 button then press HOUR button and MINUTE button to adjust hour and
minute respectively; When HOUR button or MINUTE button is pressed and hold for more than 2 seconds, the
digits of hour or minute shall increase continuously.
SNOOZE FUNCTION
When the Alarm activates, press the TIME/SNOOZE button. Then the alarm will turn off and will ring again 9
minutes later.
