DAB SETTINGS MENU
System>Equaliser: You can change the equaliser setting to change the tone of the radio sound. Choose from
Normal, Classic, Jazz, Pop or Rock settings.
System>Time: Select the time option to open the following sub-menus for setting the clock manually and
changing time and date display options.
System>Time>Set Time/Date: This option may be useful if you are in an area where it is not possible to
receive DAB radio broadcasts. You can set both the time and date manually.
System>Time>Auto update: This option sets how the clock locates time and date information. You can choose
to update from either DAB or FM radio or both. You can also disable Auto update if you prefer to retain manual
clock settings.
System>Time>Set 12/24 hour: Choose this option to display the time in 12 hour (with a.m. and p.m. indicators)
or 24 hour formats.
System>Time>Set
date format: Choose this option to change the date format from DD/MM/YYYY to MM/DD/YYYY.
System>Backlight: This option enables you to set the display brightness. Two separate options are available -
display brightness when the radio is On and also when set to Standby. Choose from the three available levels.
System>Factory reset: Select the ‘Yes’ sub-option to reset all the settings of your radio to factory original
settings. The station list will also be cleared and any stored preset memories will be erased. After a factory reset the
radio will re-scan the band and renew the station list.
System>Software upgrade: This is not a user feature. If you select this option in error, disconnect power or remove
batteries, wait for a minute then re-connect power.
System>SW Version: This option will display the version number of the control software curr
ently installed in your
radio. This will be helpful to a technician who is servicing the radio.
DAB SETTINGS MENU
A complete map of the menu is shown on the next page.
To enter the DAB Settings Menu
Set to DAB mode.•
Press and • hold the Info/Menu button.
The menu will be displayed.
Turn the • Select/Station control to step through the available options.
available options.
To choose an option from the menu, press the • Select/Station control.
Station control.
Choose the ‘System’ menu option to open the sub-menu of system options shown on the menu map.
Full Scan: Select Full Scan to re-scan the entire DAB band and refresh the station list.
and refresh the station list.
Manual Tune: Manual tuning enables you to search the band manually by pressing the Tune + or Tune - button
to step through the multiplex numbers and check if any have usable signal strength on a bargraph display. Manual
tuning is not
necessary in normal operation where scanning will have established a station list of usable
scanning will have established a station list of usable stations.
DRC: DRC is Dynamic Range Compression. Enabling DRC may improve the sound of DAB radio when listening in a
noisy room.
Prune: If your station list includes stations that you can no longer receive (you may have moved to a dierent area),
you can select the ‘Prune’ option to remove them and clean up the Station List.
ENG-7