t
When “IEEE1394” is selected:
OFF (Factory default)
Digital audio signals are not output from the IEEE1394 terminal.
ON
Digital audio signals are output from the IEEE1394 terminal.
No audio signals are output from the analog connectors when
IEEE1394 is set.
B
When “ON” is selected:
This will lead to the “AUTO PLAY”, and “AUDIO FORMAT”
setting screens. Select the item to be set using the (
•
,
ª
) cursor
buttons and press the ENTER button.
AUTO PLAY
Set this when automatically playing this unit from another device,
under circumstances in which this unit is used in conjunction with
a DENON device that supports IEEE1394.
AUDIO FORMAT
Set this format of audio signals from IEEE1394 connector.
B
When “AUTO PLAY” is selected:
OFF (Factory default)
Set this when you do not wish to control the operation of this unit
from another device.
ON
Set this when you wish to control the operation of this unit from
another device.
B
When “AUDIO FORMAT” is selected:
FORMAT1 (Factory default)
Set this when you conjunction with a DENON device.
FORMAT2
This is a mode for future system expansion.
[IEEE1394 indicator in the display]
• When “IEEE1394” set to “ON”,
this indicator lights as bellow.
flashing .......................self check of IEEE1394 connections.
light.............................IEEE1394 connection is OK.
slow flashing ..............IEEE1394 connection is NG. (Loop
connection) confirm the connection.
fast flashing ................IEEE1394 connection is NG. confirm the
connection.
Remote control unit Remote control unit
