18
ENGLISH
3
B
When “DELAY TIME” is selected
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
aside from the subwoofer should be the same. The
delay time setting can be used to make the sound
from the different speakers reach the listening
position at the same time.
Use the
•
and
ª
cursor buttons to select the setting
item, then press the ENTER button.
• When “DISTANCE” is selected:
METERS (when the
0
cursor button is pressed):
The unit of distance is set to meters (“m”).
FEET (when the
1
cursor button is pressed):
The unit of distance is set to feet (“ft”).
• When “FRONT Lch”, “FRONT Rch”, “CENTER”,
“SURROUND Lch”, ”SURROUND Rch”,
“SUBWOOFER” is selected:
Use the
0
and
1
cursor buttons to set the
distance from the listening position to the different
speakers.
✽
The distance can be set within the range of 0 to
60 feet (18 meters).
✽
The maximum difference in speaker distance for
which adjustment is possible is 15 feet (4.5
meters).
• When “DEFAULT” is selected:
When “DEFAULT” is selected and the ENTER
button is pressed, all the items are restored to their
factory default settings.
✽
When digital connections are made with an AV
amplifier, make the speaker settings on the AV
amplifier.
For DVD audio discs, the disc’s settings are given
priority, so the sound may not be produced as set
with the above speaker mode setting.
✽
Press the RETURN button to return to the
“SPEAKER SETUP” menu.
Remote control unit
3
w When “DIGITAL OUT” is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS,
bitstream signals are output from the digital audio output
terminals. When playing DVDs recorded in linear PCM or
packed PCM, linear PCM signals are output.
Select “NORMAL” when making digital connections to an
AV amplifier with built-in Dolby Digital and DTS decoder.
PCM
When playing Dolby Digital/DTS bitstream signals or
DVDs recorded in linear PCM or packed PCM, the signals
are converted into 48 kHz/16-bit PCM (2-channel) signals
and output from the digital outputs. When playing DVDs
recorded in PCM, linear PCM signals are output.
e
When “LPCM (44.1 kHz / 48 kHz)” is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are not
copyright-protected, for 2-channel PCM audio signals up to
96 kHz, linear PCM signals are output as such without being
converted from the digital outputs. (176.2 kHz and 192 kHz
signals are converted to 88.2 kHz and 96 kHz, respectively.)
PCM signals of 48 kHz/16 bits and lower are output, regardless
of whether they are copyright-protected or not.
For DVDs containing multi-channel PCM signals, the digital
signals are down-mixed for output into two channels, front left
and right. (Only the front left and right channels are output for
sources for which down-mixing is prohibited.)
When playing copyright-protected linear PCM or packed
PCM DVDs, in consideration of copyrights, no digital
signals are output for sources exceeding 48 kHz/16 bits.
When playing such sources, either set to “ON” or make
analog connections. (See page 9.)
ON
Linear PCM and packed PCM signals are converted to 44.1
kHz or 48 kHz and output. (The PCM digital audio output
signals are converted to 48 kHz or less in consideration of
copyrights.) When making digital connections to an AV
amplifier that is not compatible with 96 kHz/88.2 kHz signals,
set to “ON”.
When playing DVDs recorded in linear PCM or packed
PCM and the unit is set to output digital and analog audio
signals simultaneously, the analog audio output signals
are also converted to 48 kHz or below, so we recommend
setting to “OFF” and also making analog connections.
r When “BASS ENHANCER (2 CHANNEL)” is selected:
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In this case, set the subwoofer to “YES” at the speaker
settings.
✽To exit the setup mode
Use the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit
by pressing the SETUP button on the remote control unit.
Remote control unit
