578715
44
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
ENGLISHENGLISH
40
Auto standby
With the auto standby on, this unit will automatically enter the standby
mode after about 30 continuous minutes of stop mode with no
operation.
1
Press SETUP.
2
Use ui to select “AUTO
STANDBY”, then press ENTER
or p.
3
Use ui to select “ON”, then press ENTER or p.
The setting is entered.
NOTE
In the following situations, the Auto standby function does not operate.
When an iPod or USB memory device is connected to the USB1 port
on the unit.
When the input source is “TUNER”, “AUX1” or “AUX2”.
When the input source is “AUX1/DOCK”, and an iPod is connected
to control dock for iPod. (ASD-11R only)
When the input source is “PORTABLE IN” and a device is connected
to the portable jack.
Other functions
Auto power on
When the power is in standby, the power turns on when any of the
buttons below other than POWER ON on the remote control unit
or ON/STANDBY on the main unit is operated, and the respective
operation is performed.
5
The disc tray opens.
1 or 1/3
The input source selected directly
before the power was switched to
standby is played back.
If the last input source was “DISC/
USB2”, “AUX1”, “AUX2” or
“PORTABLE IN”, the disc set in the
main unit is played back. (Certain
types of disc cannot be played
back.)
When the control dock for iPod
is connected to the AUX IN 1
connectors and the input source is
“AUX1/DOCK”, the control dock
for iPod starts playing when 1 is
pressed.
DISC
The input source switches to “DISC/
USB2” and the disc starts playing.
(When “Optical Disc AutoPlay”
(vpage34) is “On”)
TUNER
Playback of the tuner starts.
USB1/iPod
The input source switches to “USB1/
iPod” and the USB memory device
starts playing.
AUX
The input source switches to “AUX”.
Last function memory
This stores the settings as they were immediately before going into
the standby mode.
When the power is turned back on, the settings are restored to as
they were immediately before going into the standby mode.
Registering preset codes
Registering preset codes on the supplied remote control unit will
enable turning on/standby and selecting the input source of your TV
using the remote control.
Use the preset codes table at the end of this manual to register the
preset codes.
Buttons used for operating the TV
TV POWER
TV INPUT
1
Press and hold POWER OFF and
SLEEP for at least 3 seconds.
The signal transmission indicator flashes
twice.
2
Press 0 9 and input the 4-digit
number of the brand of the
component to be preset. The
numbers are shown in the preset
code table (vEnd of this
manual).
Some manufacturers use more than one type of remote control code.
Refer to the included list of preset codes to change the number and
verify correct operation.
The default setting is “Sony”.
NOTE
Depending on the model and year of manufacture of your equipment,
some buttons may not operate.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon RBD-X1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon RBD-X1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Denon RBD-X1000

Denon RBD-X1000 Gebruiksaanwijzing - Deutsch - 60 pagina's

Denon RBD-X1000 Gebruiksaanwijzing - Français - 60 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info