584590
20
Verklein
Vergroot
Pagina terug
1/23
Pagina verder

Setup
ENGLISH
Other Operations
NOTE
When the “POWER CONFIGURATION” is set to “MASTER
TRIGGER”, the device will automatically enter the standby status
when no trigger input is detected for a period of 10 minutes.
When the “POWER CONFIGURATION” is set to ON LINE”, send
a standby command to the ETHERNET terminal or the RS-232C
terminal of the POA-3012CI.
Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, unplug the power cord from the
power outlet.
Check the Status of Each
Channel
1Press the DISPLAY button.
b Zone status is indicated on the bottom line of the display.
b Turn the SELECT / ENTER knob to change the display as follows.
VOLUME CONTROL level
LOW CUT FILTER
Channel No. & INPUT Line
ZONE T.ON MODE
2Press the DISPLAY button again.
b System status is indicated on the bottom line of the display.
b Turn the SELECT / ENTER knob to change the display as follows.
POWER CONFIG DIMMER
n To Return to the Regular Display
Press the u / RETURN button until the display returns to normal.
Other Operations During Playback
n To Adjust the Volume
Refer to “VOLUME CONTROL” on the “Main Setup” menu
(vpage 13).
n To Reduce the Low Frequency Volume
Refer to “LOW CUT FILTER” on the “Main Setup” menu (vpage
13).
n To Switch Input Setting
Refer to “INPUT SELECT” on the “Main Setup” menu (vpage
13).
Operating the POA-3012CI Using a
Browser (Web control)
This function lets you operate the POA-3012CI using Internet
Explorer.
1Check the POA-3012CI’s IP Address.
“Network Setup”“Network Information” (vpage 14)
2Input the POA-3012CI’s IP Address in Internet
Explorer.
For example, if the IP address is “10.3.18.90”, enter
http://10.3.18.90.
3If the top menu is displayed, click “Setup Menu”.
4When the “Setup Menu” is displayed, click on the
menu you want to operate.
Turning the Power On
Press the ON / STANDBY button.
The power indicator fl ashes green and the power turns on.
b The signal input to each channel is output from the speaker
terminal of each channel.
b The setting status of each channel is indicated on the display.
b Turn the SELECT/ENTER knob to change the channel displayed.
CH 1&2
BTL
BUS L+R
0.0dB
Output channel Input terminal
OPERATION MODE
(No display when in “NORMAL MODE”)
Volume level
n To return to STANDBY
Press the ON / STANDBY button again.
The power indicator lights red.
DISPLAYZONE 5
ON/STANDBY
SELECT/ENTER
u/ RETURN
ZONE operation mode indicators
Click
Setup
Click the menu
CHANNEL SETUP (vExample : 1)
SYSTEM SETUP (vExample : 2)
WARNING AND PROTECTION DATA
(vExample : 3)
AUDIO SIGNAL AND TRIGGER
INPUT (vExample : 4)
OPTION SETUP (vExample : 5)
Click “SAVE” when you want to save settings,
and click “LOAD” when you want to call settings.
Becomes each operation screen.
Operations
Getting Started Connections Troubleshooting Specifi cationsOperations
1.POA-3012CI_ENG_101.indd 17 2008/07/30 14:08:30
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon POA-3012CI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon POA-3012CI in de taal/talen: Engels als bijlage per email.

De handleiding is 3,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info