584590
17
Verklein
Vergroot
Pagina terug
1/23
Pagina verder

Getting Started Connections Operations Troubleshooting
ENGLISH
Specifications
[Selectable Channels]
[Selectable items]
CONSTANT : The power amplifier operates constantly.
TRIG. IN : The power amplifier operates when trigger input is
detected.
When trigger input is not detected, it remains in
standby mode.
A.SIGNAL : The power amplifier operates when an audio signal is
input.
If no input is received for a period of 10 minutes, it
switches to standby mode.
OFF : Turns the power amplifier off.
The POA-3012CI accepts +3 ~ 30V trigger input.
h
DIMMER MODE
Adjust display brightness of the POA-3012CI.
[Selectable items]
Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
When setting to “Dim”, “Dark” and OFF”, the display brightness
changes to “Bright” for about 3 seconds during the operation before
reverting to the set brightness.
[Selectable items]
POWER BUTTON : Operate with the ON/STANDBY button only.
ON LINE : Operate from an external device via Ethernet
or RS-232C input.
MASTER TRIGGER : Operate by detection of a trigger signal input to
the MASTER TRIGGER input terminal.
Turns on when a signal is detected.
If no input is received for a period of 10
minutes, it switches to standby mode.
g
ZONE TRIGGER ON MODE
Sets the operating specifications for the power amplifiers
of each ZONE.
For details of the channels which can be set in each mode, see
GSelectable ChannelsH in “f OPERATION MODE” (vpage 13).
j
POWER CONFIGURATION
Select the method for turning on the POA-3012CI.
The POA-3012CI accepts +3 ~ 30 V trigger input.
Even when ON LINE” or “MASTER TRIGGER” has been set, power
source operation is possible by means of ON / STANDBY button.
Setup
OFF : Display is off unless controls are operated.
Network Setup
Make network settings.
F Menu tree F
Main Setup
Network Setup
a Network Information
s Network Setup
a
Network Information
Display network information.
[Items to be checked] DHCP= ON or OFF IP Address
MAC Address
If you are using a broadband router (DHCP function), there is no need
to make the settings at “Setting the IP Address” and “Setting the
Proxy”, since the DHCP function is set to “ON” in the POA-3012CI’s
default settings.
If the POA-3012CI is being used connected to a network without the
DHCP function, the network settings must be made. In this case,
some knowledge of networks is required. For details, consult a
network administrator.
If you cannot connect to the Internet, recheck the connections and
settings (vpage 8).
If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased
your computer.
DHCP (Dynamic Host Configuration Protocol) :
These are systems by which the IP address and other network
settings are automatically set for the POA-3012CI, computer,
broadband router and network devices.
DNS (Domain Name System) :
This is a system for converting the domain names used when
browsing Internet sites (for example, “www.denon.jp”) into the
IP addresses actually used for communications (for example,
“202.221.192.106”).
1.POA-3012CI_ENG_101.indd 14 2008/07/30 14:08:26
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon POA-3012CI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon POA-3012CI in de taal/talen: Engels als bijlage per email.

De handleiding is 3,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info