84
ENGLISH
Symptom PageCheck
An image is not projected with an
HDMI/DVI connection.
23
19~21
56
19~21
50, 51
•Check the HDMI/DVI connection.(Check the status of the HDMI/DVI indicators.)
•Check whether the connected monitor equipment or other equipment supports HDCP.
(The DVD-5910 will not output a video signal unless the connected equipment supports
HDCP.)
•Check the settings of “HDMI/DVI SELECT”.
•Check whether the output format of the DVD-5910 (HDMI/DVI FORMAT) matches the
input format of the connected equipment.
•Check whether the video output setting at “PURE DIRECT” is set to “VIDEO OUT : OFF”
or “ALL OFF”.
Remote control unit does not operate.
24
24
24
24
24
•Check that the batteries are inserted in the proper “<” and “>” directions.
•The batteries are dead. Replace them with new batteries.
•Point the remote control unit at the remote control sensor when operating it.
•Operate the remote control unit within a distance of 7 meters from the remote control
sensor.
•Remove the obstacle between the remote control unit and remote control sensor.
ENGLISH
Picture and sound are interrupted with
HDMI/DVI connections
56• When the “HDMI/DVI FORMAT” setting is set to “AUTO”, the picture or sound may be
interrupted when cables are connected or disconnected or depending on the conditions of
the connected device(s).
