ENGLISH
ENGLISH
Making the initial settings Making the initial settings
18
1
2
3
Use [
DD HH
] to select “TEST TONE”, use [
FF GG
] again
to make the settings, then press [ENTER].
2
OFF:
No test tones are output.
At the HDMI speaker setting screen, use [
DD HH
] to
select “CHANNEL LEVEL”, then press [ENTER].
1
If “AUTO” is selected:
Use [
FF GG
] to adjust the volume.
• The volume can be adjusted between the range of 0 to –10 dB.
• The test tones are output automatically in the order shown
below.
3
-1
AUTO:
Adjust the volumes while listening to the test tones output
automatically from the different speakers.
MANUAL:
Switch the speaker from which the test tone is output manually as
you adjust the volumes.
If “MANUAL” is selected:
Use [
DD HH
] to select the speaker, use [
FF GG
] to adjust
the volume, the press [ENTER].
3
-2
¢ Channel level
Set the volume of the different speakers so that the test tones output
from them sound to have the same volume.
1
2
3
-1
3
-2
4
The display differs
depending on the
connected speaker.
•To return to the setting screen:
Press [RETURN].
•To return to the setting screen:
Press [RETURN].
FRONT LCH FRONT RCH
SUBWOOFER SURROUND LCH SURROUND RCH
CENTER
