581047
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Speakers used
4
ENGLISH
ENGLISH
Cable indications
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cables (not supplied).
Audio cable
Analog connections (Stereo)
R
L
R
L
Pin-plug cable
(White)
(Red)
Signal direction
Audio signal
IN OUT OUT IN
Connecting the Audio Equipment
NOTE:
Do not plug in the power supply cord until all
connections have been completed.
When making connections, also refer to the
operating instructions of the other
components.
Be sure to connect the left and right channels
properly (left with left, right with right).
Do not bundle power cords together with
speaker cables. Doing so could result in
humming or noise.
Do not turn up the volume when no turntable
is connected to the PHONO input terminals.
Doing so will cause humming or noise.
When not connecting a turntable, leave the
included short-circuiting pin plug plugged in.
Cautions on playing SA sources:
When regular speakers not compatible with SA
sources (DVD Audio discs, Super Audio CDs
and other sources including treble components
above the audible range), set the properties of
the player (DVD Audio player, Super Audio CD
player, etc.) for use with regular speakers (or
amplifiers).
The speakers may be damaged if the volume is
set too high when playing SA sources.
For instructions on setting the player, refer to
the operating instructions included with the
player.
Impedance
8 ~ 16 /ohmsA and B
Connections
Connecting the speakers
¢ Speaker impedance
Use speakers with impedances within the ranges
shown below according to their usage conditions.
4 ~ 16 /ohmsA or B
Connect the speaker terminals with the speakers
making sure that like polarities are matched (
<
with
<
,
>
with
>
).
NOTE:
When making connections, take care that
none of the individual conductors of the
speaker cable come in contact with adjacent
terminals, with other speaker cable
conductors, or with the rear panel and
screws.
NEVER touch the speaker terminals when
the power is on. Doing so could result in
electric shocks.
Note on speaker impedance
When using speakers with an impedance
below the designated value (for example 4
/ohms), playing for long periods of time with
the volume high could cause the temperature
to rise, activating the protection circuit.
When the protection circuit is activated, the
output to the speakers is cut off and the power
indicator blinks. If this happens, unplug the
power cord, wait for the set to cool off and
improve ventilation around the unit. Also check
the wiring of the input cables and the speaker
cables. After doing this, plug the power cord
back in and turn the unit’s power back on.
If the protection circuit is activated again even
though there are no problems with the wiring or
the ventilation around the unit, switch off the
power and contact a DENON service center.
Connecting the speaker cables
1. Loosen by turning
counterclockwise.
Either tightly twist or terminate the core
wires.
2. Insert the cable.
3. Tighten by turning
clockwise.
Downloaded from www.Manualslib.com manuals search engine
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Denon-DRA-500AE

Zoeken resetten

  • Hoe kan ik de ipod toewijzing aan de auto opheffen? Gesteld op 26-12-2023 om 11:16

    Reageer op deze vraag Misbruik melden
  • Ik heb pas een nieuwe Denon afstandsbediening besteld, omdat ik dacht hem kwijt te zijn. Nu heb ik de oude weer gevonden en wil de nieuwe kwijt. Wie heeft er belang bij? Heeft me 120 euro gekost, maar doe het weg tegen elk aannemelijk bod. Gesteld op 7-10-2021 om 21:18

    Reageer op deze vraag Misbruik melden
  • waar kan ik de preamp aanluiten van mijn platenspeler Gesteld op 2-10-2021 om 13:05

    Reageer op deze vraag Misbruik melden
  • hebt u een nederlandstalige handleiding , aangezien mijn reciever het niet meer doet. Gesteld op 7-4-2020 om 16:21

    Reageer op deze vraag Misbruik melden
  • Onze tv is aan de receiver aangesloten en via de aux verbinden we eea. Sinds gisteren verschijnt bij aux ook de ipod dus aux/ipod terwijl we geen ipod hebben. De receiver geeft aan niet te connecten... We begrijpen niet waardoor de ipod erbij is gekomen. Wie weet hoe wij weer gewoon alleen de aux instelling kunnen krijgen. We kunnen nu de televisie niet over de receiver en dus niet over de boxen laten spelen. Gesteld op 9-9-2019 om 20:38

    Reageer op deze vraag Misbruik melden
  • Het display van mijn DRA 500AE licht alleen op bij gebruik van de toetsen op het toestel oof de afstandsbediening. Wie kan mij helpen dit weer in een continue status te veranderen? Gesteld op 23-9-2018 om 12:48

    Reageer op deze vraag Misbruik melden
6

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon DRA-500AE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon DRA-500AE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Denon DRA-500AE

Denon DRA-500AE Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info