Contents
Getting Started
Thank you very much for purchasing the DENON turntable.
Please read the operating instructions thoroughly in order to acquaint yourself with the turntable system and achieve maximum
satisfaction from it.
Before using
···················································································1
Accessories
····················································································1
About the equalizer switch
··························································2
Assembly
························································································2
Mounting the turntable
·································································2
Mounting the counterweight
························································2
Mounting the head shell with cartridge
········································2
Mounting the dust cover
······························································2
Adjustments
···················································································3
Stylus pressure and anti-skating adjustment
································3
Part names and functions
·····························································4
Starting playback using the auto play function
·························5
Starting playback manually
·························································5
Stopping playback in the middle of a record
·····························5
Replacing the stylus
······································································6
Replacing the cartridge
·································································6
Getting Started
Operation
Before using
Pay attention to the following before using this unit:
• Power requirements
Power requirements for electrical equipment differ from area to
area. Please ensure that your machine meets the power
requirements in your area.
If it doubt, consult a qualified electrician.
Connections
...................................................................................4
• About the power switch
This turntable is not equipped with a primary power switch. The
power switch is incorporated in the tone arm of the turntable. The
power to the turntable is cut when the tone arm returns to the tone
arm rest. Note however, that the power is not completely turned off
in this case. If you wish to completely turn the power off,
disconnect the power supply cord from the household AC outlet.
• Protect the turntable too
• Never touch the plug with wet hands.
• Always pull out by the plug and never the cable.
• Only let a qualified professional repair or reassemble the turntable.
An unauthorized person might touch the internal parts and receive
a serious electric shock.
• Never allow a child to put anything, especially metal, into the
turntable.
• What you should know to protect yourself
• Use only a household AC power source. Never use a DC power
source.
• If water is spilled on the turntable, disconnect it and call your
dealer.
• Make sure that the turntable is well ventilated and away from
direct sunlight.
•To avoid damage to the internal circuits and the external surface,
keep it away from heat (stoves, etc.).
•Avoid using spray type insecticide near the turntable it can
damage the finish and might ignite suddenly.
•To avoid damaging the finish, never use paint thinner or other
similar chemicals to clean the turntable.
• Place the turntable on a flat and solid surface.
• If you don’t plan to use the turntable for a long period of time,
disconnect the power supply cord.
•To protect the insulators, always lift the turntable when you move
it. And before moving the turntable, disconnect all the connecting
cables.
• When transporting the turntable over a long distance, place it in its
original box wrapped in protective wrappers.
• Moving the unit
To prevent short-circuits or damaged wires in the connection
cables, always unplug the power supply cord and disconnect the
connection cables between all other audio components when
moving the unit.
• Before turning the power switch on
Check once again that all connections are correct and that there are
not problems with the connection cables. Always set the power
switch to the standby position before connecting and disconnecting
connection cables.
• Store these instructions in a safe place.
After reading, store this instructions along with the warranty card in
a safe place.
• Note that the illustrations in these instructions may differ from
the actual unit for explanation purposes.
Troubleshooting
·············································································7
Specifications
·················································································7
Others
