ENGLISH
Getting Started Connections Specifications
Crossfader Start
1
Turn on the CROSS FADER START A, B.
2
Slide the Crossfader all the way in direction opposite
the source you want to start.
(In the following example, startup is done with the CD
player connected to PGM1.)
3
Set the standby mode on CD player.
4
Use the CROSS FADER CONTOUR controls to control
the Crossfader startup curve.
5
When the Crossfader is slid in the opposite direction,
CD player play will begin.
NOTE
• When the CROSS FADER REVERSE is set to ON, the Crossfader’s
operating direction is reversed.
• Channel Fader Start and Crossfader Start for the same source will not
operate simultaneously.
You must select from either one. If both CH FADER START and
CROSSFADER START A, B switches are ON, priority will be the
Crossfader.
Channel Fader Start
1
Turn on the CH 1/2 FADER START.
2
Move the Channel Fader of CH-1 or CH-2 control all
the way to the bottom.
3
Set the standby mode on CD player.
4
When you want to start the player, move up the
Channel Fader and the CD player will begin playing.
