614645
25
Verklein
Vergroot
Pagina terug
1/49
Pagina verder
23
ENGLISH
14
PRESET
1. Preset mode
q The preset mode is available when PRESET button is pushed for more than 1 sec while DN-S5000 is in
Cue, pause or no disc mode.
w Turn the PARAMETERS knob to select the preset item.
e After selecting an item, push the PARAMETERS knob to select the preset data.
r To change other Preset items, repeat these steps.
t Push the PRESET, CUE or PLAY/PAUSE (
13) button to exit from the Preset mode.
2. Preset items and data
The * mark next to the data indicates the default value.
(1) AUTO CUE : Auto Cue level search on/off. (ON* / OFF)
(2) PITCH RANGE : Select the playing pitch range when the power is turned on. (±4 / ±10* / ±16 / ±24%)
(3) ALPHA-TRACK OUTPUT : Alpha-Track playback output destination. (Main out* / Alpha out)
(4) PLATTER : Select whether or not the Platter is to rotate during playback. (Turn round* / Turn stop)
(5) PLATTER MODE MEMO :
When the Platter mode (DRAG-S, BRAKE and ECHO) parameters, the source and the on/off setting
are stored, the stored data is set each time the power is turned on.
q To set the effect data, push the PARAMETERS knob and select YES.
•“Set OK? flashes on the character display.
w Push the PARAMETERS knob again and select OK to execute setting the data.
e Once setting is completed, Complete! is displayed.
(6) AUTO LOAD : Time for automatically loading disc. (OFF / 10 / 30 / 60* seconds)
(7) EOM : Track end message start time. (OFF / 10* / 15 / 20 / 30 / 60 / 90 seconds)
(8) DIGITAL OUT OUTPUT LEVEL : Select the digital out output level. (Normal* / 6 dB Down)
NOTE: Use 6dB if the playback output is clipped when the Main and Alpha-Tracks are played
simultaneously at the same position.
(9) FADER START MODE: Select 2-line type (Cue and Play) or 1 line type (Play and Pause).
(Play /Cue* / Play/Pause)
(10) POWER ON PLAY : Playback starts when the power is turned on if a disc is loaded. (On / Off*)
(11) A3/4 MODE : Select the A3 and A4 button operating modes when the power is turned on.
(Sampler* / 4H/S / Alpha-Track H/S)
(12) SINGLE/CONTINUOUS : Select the play mode when the power is turned on. (Single* / Continuous)
(13) ELAPSED/REMAIN: Select the time mode when the power is turned on.
(Elapsed* / Remain)
(14) PROGRAM ALL CLEAR : Clear all program play data in the non-volatile memory.
q To clear the program, push the PARAMETERS knob and select YES.
•“Clear OK? flashes on the character display.
w Push the PARAMETERS knob again and select OK to execute clearing the program.
Prog. Clear is displayed on the character display while data clearing.
e Once clearing is completed, Complete! is displayed.
(15) MEMO ALL CLEAR : Clear all MEMO data in the non-volatile memory.
q To clear all MEMO data, push the PARAMETERS knob and select YES.
•“Clear OK? flashes on the character display.
w Push the PARAMETERS knob again and select OK to execute clearing all MEMO data.
•“Memo Clear is displayed on the character display while clearing.
e Once clearing is completed, Complete! is displayed.
(16) MEMO ALL COPY :
Copy all MEMO data from the master unit of DN-S5000 (or DN-D9000, DN-2600F) to the slave unit
of DN-S5000 (or DN-D9000) when both unit are connected by the normal straight Cable. (See
diagram for the cable.)
NOTE: Be sure CD player have no discs inside.
A straight cable used:
Using the straight cable, connect the X-EFFECT terminals between two DN-S5000 units or
between one DN-2600F and one DN-S5000 unit or between one DN-D9000 and one DN-S5000
unit.
If a DN-2600F is the master unit, take the procedures below in the Preset mode of the DN-2600F
beforehand. (For details, refer to the DN-2600Fs operating instructions.)
Set the Copy Master for the Preset item (14).
Then, step to the q below on the slave unit of DN-S5000.
Copying can be performed using the DN-S5000 and DN-D9000 in the same way as when using
two units of the DN-S5000.
Perform the copying operation as below on the slave unit of DN-S5000.
q To start copying, push the PARAMETERS knob and select YES. Now Copy OK?
messages flashes on the character display.
w Push the PARAMETERS knob again to confirm. Now Start OK? is displayed.
NOTE: If a DN-2600F is the master unit, take the procedures below in the Preset mode of
the DN-2600F here.
In the Preset item (15), first start copying on the DN-2600F. Then, step to e below
on the slave unit of DN-S5000.
e Push the PARAMETERS knob once again, and the unit starts copying when the MEMO data
are received from the master unit. Now Copying is displayed.
If the master unit and the slave unit are not connected properly or the DN-2600F is not
prepared to start sending data, Not Connect is displayed on the character display.
r When copying is completed correctly, Complete! is displayed.
•“Copy Error is displayed on the character display if copying was not completed correctly.
In this case, try the above procedure again.
The copied MEMO data are added to the highest number area of the slave DN-S5000 unit.
(17) The DN-S5000s software version is displayed. (SYSTEM / DSP / CD DRIVE)
(18) PRESET CLEAR : Set all the preset data back to the factory defaults.
q To clear the PRESET data, push the PARAMETERS.
Initial OK? flashes on the character display.
w Push the PARAMETERS knob again and select OK to start clear the preset data.
Preset Int is displayed on the character display while data clearing.
e Once clearing is completed, Complete! is displayed.
DN-S5000
DN-S5000 (X'EFFECT IN)
DN-2600F (X'EFFECT)
DN-D9000 (X'EFFECT)
X'EFFECT OUT
POWER
ON OFF
DIGITAL OUT
X-EFFECT
ALPHA
IN
OUT
MAIN
LL
LINE OUT
RR
FADER
MAIN
MONITOR
POWER
ON OFF
DIGITAL OUT
X-EFFECT
ALPHA
IN
OUT
MAIN
LL
LINE OUT
RR
FADER
MAIN
MONITOR
X-EFFECT IN jack
DN-S5000-1 DN-S5000-2
X-EFFECT OUT jack
3.5 mm stereo mini cord
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon DN-S5000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon DN-S5000 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 6,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info