614639

Denon DN-D4000 Handleiding

24
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
18
Getting started Troubleshooting Specifications Index
Others Preset
Playback
Connection
Setting the cue point
By setting a cue point, the track can be played back from the set position.
n Setting the cue point
Pause the track in the position where you want to set the cue point, and press CUE.
The cue point is set at the paused position.
•Irrespective of the mode, the cue point is set at the start of the track when the track is loaded.
n Returning to the cue point
•Playback stops, returns to the position where you want to playback again (cue point), and is paused
(back cue function).
•When this function is used, playback can always be started from the same position.
During playback, press CUE.
Playback stops, cues to the playback start position (cue point), and pauses.
n Moving the cue point
There are two methods for moving the cue point, using the shuttle ring, or using the jog wheel.
Setting with shuttle ring and jog wheel
1
During pause, turn the shuttle ring in the forward or reverse direction to move the
cue point while listening to the playback sound.
2
If the jog wheel is turned in the forward or reverse direction, you can move the cue
point while listening to the playback sound frame by frame.
11
ENGLISH
DN-D4500 has six pitch ranges,
4%, 10%, *16%, 24%, 50% and
100%.
(*Max MP3) When the
RANGE button !4 is pushed
for more than 1 sec, the pitch
range can be selected by turning
the TRACK SELECT knob o.
• When the TRACK SELECT
knob o is pushed down the
pitch range is entered and
the pitch range selection
mode is completed.
6
PITCH/BRAKE
(1) Pitch
• There are two ways to change the playing speed.
• Adjust the Pitch using the pitch slider !3.
• The PITCH BEND button !2 or jog wheel y can be used to temporarily change the pitch.
• The playing speed can be changed greatly to achieve effect similar to those achievable with analog vinyl.
• If you wish to preserve the original key of sound, set the Key Adjust function to ON.
1-1
[Pitch slider]
Set the variable speed mode.
Push the PITCH button !4 to light
the PITCH LED.
•
PITCH → KEY (key adjust) → OFF
(Green) (Orange) (Off) (LED color)
The Pitch decreases
when the pitch slider !3
is moved upwards,
increases when the pitch
slider !3 is moved
downwards.
1-2
2-1
[PITCH BEND button]
Push the PITCH BEND + (or
PITCH BEND –) button !2.
• The Pitch increases or
decreases temporarily while the
PITCH BEND + or PITCH BEND
– button !2 is pushed.
• The extent to which the PITCH BEND button
!2 changes the Pitch is proportionate to the
amount of time the button is pushed. The
longer the button is held down, the greater
the percentage of change.
2-2
Set the jog wheel to the pitch bend mode.
During playback, pitch bend is setting for the
Jog wheel.
• The playing speed increases
gradually when the jog wheel
y is turned clockwise and
decreases gradually when the jog
wheel y is turned
counterclockwise. When you stop turning
the jog wheel y, the playing speed returns
to the previous speed.
• When playback is stopped, the jog/shuttle
wheel is set to the search mode.
0%
Pitch
decreases
Pitch
increases
§
SEARCH
SCAN
6
7
I
I
I
1-3
• When the track is selected with the TRACK SELECT knob o and the PLAY/PAUSE button !1 is pushed,
playback starts from the beginning of that track. If you wish to start from a different position, use the
procedure described below to search for the desired position.
(2) Starting playback from the Middle of a track (Manual Search)
1
Find the play start position.
Turn the shuttle ring !7 to change the
playback position quickly. (Search for the
approximate playback position.)
The fast forward/reverse mode
is set when the shuttle ring
(outer side) !7 is turned.
The speed changes according to
the angle at which the ring is
turned.
• When operated during playback, playback
resumes after the operation.
•When playback is started, the jog wheel is
set to the bend mode.
• When turned fully in either direction, the
playback position jumps about 10 seconds.
The jump time can be selected in the preset
mode from 10, 20, 30 or 60 sec.
2
Turn the jog wheel y. (Search for the precise
playback position.)
When the jog wheel (inner side)
y is turned, the frame move
mode is set.
The playback position can be
moved in units of one frame.
Listen to the sound and find the desired play
start position.
§
SEARCH
SCAN
6
7
I
I
I
RVS FWD
§
SEARCH
SCAN
6
7
I
I
I
Shockproof memory
•A maximum of approximately 20 seconds
uncompressed audio data is stored into memory
(per drive). This guards audible interruptions due
to external mechanical shocks such as bumps
or other hard vibrations.
• If advanced data reading is not possible due to
scratches or dirt on the disc, playback stops
once the data stored up to that point is read.
RVS FWD
NOTE:
• For MP3 discs, frames are not displayed,
however frame resolution is audible by turning
the jog wheel (inner side) y.
(2) BRAKE
• Use this function to achieve effect similar to analog players.
1
Push the BRAKE button i to light
the BRAKE LED.
• The effect sound is similar to
a DJ turntable coming to a
quick stop. This effect can
be achieved by pushing the
PLAY/PAUSE button !1
during playback.
RVS FWD
3
Press CUE.
The cue point is set at the moved position.
Press 13.
The cue point is set at the moved position, and playback starts.
Operations during playback
See the illustration on the previous page for details of the buttons used for the
operations on this page.
Fast forward/Rewind
Therearefourmethodsforfastforward/rewinding.
n Fast forward/Rewind using shuttle ring and jog wheel
During playback, turn the shufe ring.
If turned in the FWD direction, the playback point is moved to the forward direction, and playback is
resumed from the new point.
If turned in the RVS direction, the playbackpoint is moved to the reverse direction,and playback is
resumed from the new point.
During playback, turn the jog wheel (inner side).
If turned in the FWD direction, the playback speed increases.
IfturnedintheRVSdirection,theplaybackspeeddecreases.
11
ENGLISH
DN-D4500 has six pitch ranges,
4%, 10%, *16%, 24%, 50% and
100%.
(*Max MP3) When the
RANGE button !4 is pushed
for more than 1 sec, the pitch
range can be selected by turning
the TRACK SELECT knob o.
• When the TRACK SELECT
knob o is pushed down the
pitch range is entered and
the pitch range selection
mode is completed.
6
PITCH/BRAKE
(1) Pitch
• There are two ways to change the playing speed.
• Adjust the Pitch using the pitch slider !3.
• The PITCH BEND button !2 or jog wheel y can be used to temporarily change the pitch.
• The playing speed can be changed greatly to achieve effect similar to those achievable with analog vinyl.
• If you wish to preserve the original key of sound, set the Key Adjust function to ON.
1-1
[Pitch slider]
Set the variable speed mode.
Push the PITCH button !4 to light
the PITCH LED.
•
PITCH → KEY (key adjust) → OFF
(Green) (Orange) (Off) (LED color)
The Pitch decreases
when the pitch slider !3
is moved upwards,
increases when the pitch
slider !3 is moved
downwards.
1-2
2-1
[PITCH BEND button]
Push the PITCH BEND + (or
PITCH BEND –) button !2.
• The Pitch increases or
decreases temporarily while the
PITCH BEND + or PITCH BEND
– button !2 is pushed.
• The extent to which the PITCH BEND button
!2 changes the Pitch is proportionate to the
amount of time the button is pushed. The
longer the button is held down, the greater
the percentage of change.
2-2
Set the jog wheel to the pitch bend mode.
During playback, pitch bend is setting for the
Jog wheel.
• The playing speed increases
gradually when the jog wheel
y is turned clockwise and
decreases gradually when the jog
wheel y is turned
counterclockwise. When you stop turning
the jog wheel y, the playing speed returns
to the previous speed.
• When playback is stopped, the jog/shuttle
wheel is set to the search mode.
0%
Pitch
decreases
Pitch
increases
§
SEARCH
SCAN
6
7
I
I
I
1-3
• When the track is selected with the TRACK SELECT knob o and the PLAY/PAUSE button !1 is pushed,
playback starts from the beginning of that track. If you wish to start from a different position, use the
procedure described below to search for the desired position.
(2) Starting playback from the Middle of a track (Manual Search)
1
Find the play start position.
Turn the shuttle ring !7 to change the
playback position quickly. (Search for the
approximate playback position.)
The fast forward/reverse mode
is set when the shuttle ring
(outer side) !7 is turned.
The speed changes according to
the angle at which the ring is
turned.
• When operated during playback, playback
resumes after the operation.
•When playback is started, the jog wheel is
set to the bend mode.
• When turned fully in either direction, the
playback position jumps about 10 seconds.
The jump time can be selected in the preset
mode from 10, 20, 30 or 60 sec.
2
Turn the jog wheel y. (Search for the precise
playback position.)
When the jog wheel (inner side)
y is turned, the frame move
mode is set.
The playback position can be
moved in units of one frame.
Listen to the sound and find the desired play
start position.
§
SEARCH
SCAN
6
7
I
I
I
RVS FWD
§
SEARCH
SCAN
6
7
I
I
I
Shockproof memory
•A maximum of approximately 20 seconds
uncompressed audio data is stored into memory
(per drive). This guards audible interruptions due
to external mechanical shocks such as bumps
or other hard vibrations.
• If advanced data reading is not possible due to
scratches or dirt on the disc, playback stops
once the data stored up to that point is read.
RVS FWD
NOTE:
• For MP3 discs, frames are not displayed,
however frame resolution is audible by turning
the jog wheel (inner side) y.
(2) BRAKE
• Use this function to achieve effect similar to analog players.
1
Push the BRAKE button i to light
the BRAKE LED.
• The effect sound is similar to
a DJ turntable coming to a
quick stop. This effect can
be achieved by pushing the
PLAY/PAUSE button !1
during playback.
RVS FWD
During pause, turn the shufe ring.
If turned in the FWD direction, the pause point is moved to the forward direction, and pause mode is set
at the new point.
IfturnedintheRVSdirection,thepausepointismovedtothereversedirection,andpausemodeisset
at the new point.
During pause, turn the jog wheel (inner side).
If turned in the FWD direction, the pause point is moved to the forward direction frame by frame, and
pause mode is set at the new point.
IfturnedintheRVSdirection,thepausepointismovedtothereversedirectionframebyframe,and
pause mode is set at the new point.
… 24 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon DN-D4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon DN-D4000 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 3,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info