Handleiding Denon DBP-2010CI (pagina 43 van 52) (Engels)

584580

Verklein

Vergroot

Pagina terug

1/52

Pagina verder

Function Setup Function Setup

ENGLISH

Introduction Connections Playback Function Setup Others

Proxy Port

Use [U/V] to select “Proxy Port”, then press [ENTER].

• Proxy port setting screen will appear.

Enter proxy port number with [the Number buttons].

After you enter all correctly, press [ENTER] to complete the setting.

4) Press [SETUP] to exit.

䡵Connection Speed

You can set connection speed as your preference. (The default setting is “Auto”.)

1) Follow steps 1) to 2) in “IP Address Setting” on page 38.

2) Use [U/V] to select “Connection Speed”, then press [ENTER].

3) Use [U/V] to select the desired setting, then press [ENTER].

4) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.

䡵BD-Live Setting

You can limit the Internet access from the BD-Live functions. (The default setting is “Allow”.)

1) Follow steps 1) to 2) in “IP Address Setting” on page 38.

2) Use [U/V] to select “BD-Live Setting”, then press [ENTER].

3) Use [U/V] to select the desired setting, then press [ENTER].

4) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.

You can deactivate all the network connection and settings by following the instructions below.

1) Follow steps 1) to 4) in “Connection Test” on page 38.

2) Use [U/V] to select “Disable”, then press [ENTER].

3) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.

You can update the software by connecting the unit to the Internet.

1) Follow steps 1) to 3) in “Connection Test” on page 38.

2) Use [U/V] to select “Network Update”, then press [ENTER].

• Confirmation message will appear.

3) Use [U/V] to select “Yes”, then press [ENTER].

• This unit will start checking for the latest firmware version.

4) Confirmation message will appear.

Use [U/V] to select “Yes”, then press [ENTER].

• The unit will start downloading the latest firmware version.

5) When the download completes, confirmation message will appear.

Press [ENTER].

• The unit will start updating the firmware version.

• It may take a while to complete the updating. (Please wait until “100%” appears on the front

panel display.)

6) After updating finishes, this unit will restart and open the disc tray automatically.

Note

For IP Address Settings and DNS Settings:

• The range of input number is between 0 and 255.

• If you enter a number larger than 255, the number will automatically be 255.

• The manually entered number will be saved even if you change the setting to “Auto(DHCP)”.

• When you enter a wrong number, press [CLEAR] to cancel. (The number will be back to “0”.)

• If you want to enter 1 or 2-digit number in one cell, press [Z] to move on to the next cell.

• If the entered IP address or the default gateway or primary DNS number is same as the default

setting, IP address setting will be set to “Auto(DHCP)”. (The manually entered number will be

saved.)

• When IP address setting is set to “Manual”, the setting of DNS setting will automatically be

“Manual” and when IP address setting is set to “Auto(DHCP)”, you can set either “Auto(DHCP)” or

“Manual” for DNS setting.

For Proxy Settings:

• The range of input number for the proxy port number is between 0 and 65535. (If you enter a

number larger than 65535, it will be regarded as 65535.)

• For proxy port, the selected ports may be blocked and not be able to use depending on your

network.

“Auto” : Set the appropriate connection speed automatically, in accordance with your

network environment.

“10BASE Half” : Set the connection speed to “10BASE Half”.

Proxy Port

Please select the input Proxy Port.

then press ‘ENTER’.

∗∗∗∗∗

“10BASE Full” : Set the connection speed to “10BASE Full”.

“100BASE Half” : Set the connection speed to “100BASE Half”.

“100BASE Full” : Set the connection speed to “100BASE Full”.

“Allow” : Internet access is permitted from all BD-Live contents.

“Limited Allow” : Internet access is permitted only for BD-Live contents which have content

owner certificates. Internet access without the certificates are prohibited.

“Prohibit” : Internet access is prohibited from all BD-Live contents.

Disable

Note

• The network connection can be reactivated by setting the network connection to “Enable(Easy)”

or “Enable(Custom)”.

Network Update

Remote control operation

buttons

:Displaying the menu

Cancel the menu

:Move the cursor

(Up/Down/Left/Right) : Confirm the setting : Return to previous menu

E5KA0UD_EN.book Page 40 Tuesday, April 28, 2009 11:15 AM

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Denon DBP-2010CI Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info