12
ENGLISH
6
OPENING AND CLOSING THE DISC DOOR AND
LOADING DISCS
1
Press the button
to turn the power
on.
NOTES:
• Do not load discs in the disc holder while the
disc door is opening or closing. Doing so may
cause the disc to fall from the disc holder.
Make sure that “Insert Disc” is displayed
before loading the disc.
• If your finger, etc., should get caught, keep calm
and press the
5 button.
• Do not insert foreign objects into the disc
holder. Doing so could result in damage.
• Do not press the disc door in when the power
is turned off. Doing so could result in damage.
(Main unit) (RC-909)
3
Press the 5 button.
• The disc door
opens.
• When pressed in
the standby mode,
the power turns
on and the disc
door opens.
4
Once “Insert Disc” appears on the
display, load the disc in the disc
holder with the labeled side facing
towards you.
Be careful not to touch the disc’s signal
surface.
Make sure the disc door is fully opened
when loading discs. (Fig. 1)
The door opens and closes when the
function is set to anything other than
“CD”, but in this case the display does not
switch.
5
The disc is automatically drawn in
and the door closes.
To eject the disc, press the 5 button.
When the 1/3 button is
pressed after the disc is
loaded, the disc door
closes and playback
starts.
The disc holder is the
place in the disc door
here the disc is set.
q With the disc door open, press the
VOLUME button and
1/3 button on
the main unit simultaneously, then press
the
2/BAND button within 3 seconds.
• “Holder Down” is displayed and the disc holder
lowers.
Removing a disc that has fallen from the
disc holder
Within
3 seconds
w Turn the main unit upside-down and
remove the disc.
Note that the disc may be scratched.
e Press the button to turn the
power off.
(Main unit) (Main unit)
