Automatic searching begins, then
stops when a station is tuned in.
If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
Manual tuning
1Set the input function to “TUNER”.
2Watching the display, press the BAND button to select the
desired band (AM or FM).
3Press the MODE button to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns.
4Press the TUNING UP or DOWN button to tune in the desir-
ed station.
The frequency changes continuously when the button is held
in.
NOTES:
• When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At open
frequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.