4
2INTRODUCTION
Thank you for choosing the DENON AVR-5700 Digital Surround A / V receiver. This remarkable component has been engineered to provide superb surround sound
listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.
As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this
manual before proceeding.
TABLE OF CONTENTS
Before Using ……………………………………………………………………4
Cautions on Installation …………………………………………………………4
Cautions on Handling ……………………………………………………………5
Features …………………………………………………………………………5
Connections …………………………………………………………………6~13
Part Names and Functions ………………………………………………14, 15
Setting up the system ……………………………………………………16~27
Remote Control Unit ………………………………………………………28~36
Operation …………………………………………………………………36~42
Surround ……………………………………………………………………43~47
DSP Surround Simulation…………………………………………………48~51
Listening to the Radio ……………………………………………………52~54
Last Function Memory…………………………………………………………54
Initialization of the Microprocessor …………………………………………54
Troubleshooting ………………………………………………………………55
Additional Information ……………………………………………………56~61
Specifications …………………………………………………………………62
2ACCESSORIES
Check that the following parts are included in addition to the main unit:
QOperating instructions…..1 WWarranty ( for North America model only )………...........1 EService station list…….....1 RAC cord.................……1
TRemote control unit YR6P/AA batteries….....2 UAM loop antenna…...1 IFM indoor antenna…........1 OFM antenna adaptor….1
(RC-853)………………… ..1
1BEFORE USING
Pay attention to the following before using this unit:
•Moving the set
To prevent short circuits or damaged wires in the connection
cords, always unplug the power cord and disconnect the
connection cords between all other audio components when
moving the set.
•Before turning the power switch on
Check once again that all connections are proper and that there are
not problems with the connection cords. Always set the power
switch to the standby position before connecting and
disconnecting connection cords.
•Store this instructions in a safe place.
After reading, store this instructions along with the warranty in a
safe place.
•Note that the illustrations in this instructions may differ from
the actual set for explanation purposes.
2CAUTIONS ON INSTALLATION
Noise or disturbance of the picture may be generated if this unit or
any other electronic equipment using microprocessors is used near a
tuner or TV.
If this happens, take the following steps:
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this unit’s
power cord and input/output connection cords.
• Noise or disturbance tends to occur particularly when using indoor
antennas or 300 Ω/ohms feeder wires. We recommend using
outdoor antennas and 75 Ω/ohms coaxial cables.
For heat dispersal, leave at least 10 cm of space between the
top, back and sides of this unit and the wall or other
components.
10 cm or more
210 cm or more
22
Wall
10 cm or more
1
2
5
4
7
3
6
8
9
10
11
12
13
14
15
16
17
