103
Advanced Setup – Part 1
Setting the Manual EQ Setup
•Allows you to adjust the tonal quality of the various speakers
(except the subwoofer) while listening to a music source.
1Press the CURSOR DDor HHbutton to select the
“Manual EQ Setup” at the “Advanced
Playback” menu, then press the ENTER button.
•Display the “Manual EQ” screen.
2Press the CURSOR FFor GGbutton to select the
adjustment mode, then press the ENTER
button.
All CH:
All channels can be adjusted simultaneously.
L/R CH:
The left and right channels of the pair of speakers
can be adjusted simultaneously.
Each CH:
The channels can be adjusted separately.
3Press the CURSOR FFor GGbutton to select the
speaker to be set.
Example: When “L/R CH” is selected.
The display changes as follows.
qSelect the “L/R CH”
When the surround back speaker setting is set to
“1spkr” at “Speaker Configuration”, this is set to
“SB”.
eSelect the “All CH”
In this case, speaker selection is not performed.
If a value is already set for the FL channel, the data
stored for the FL channel is displayed.
4Press the CURSOR DDor HHbutton to select the
frequency, then press the CURSOR FFor GG
button to adjust the gain level.
Each frequency can be adjusted the range from –20 dB
to +6 dB in 0.5 dB step.
5Press the ENTER button to enter the setting.
•The “Manual EQ” screen reappears.
6Press the CURSOR DDor HHbutton to select the
“Exit”, then press the ENTER button.
•The “Advanced Playback” menu reappears.
