85
Advanced Operation
Multi-source recording / playback
1Press the ZONE3/REC SELECT button until
“RECOUT SOURCE” appears on the display.
•The “REC” indicator lights.
2Turn the FUNCTION knob to select the source
you wish to record.
3Set the recording mode.
For operating instructions, refer to the manual of the
component on which you want to record.
2Playing one source while recording another
(REC OUT mode)
2Recording Dolby Digital and DTS multichannel
sources
•With this set it is possible to record Dolby Digital and DTS
multichannel signals converted into 2-channel analog
signals.
•The recording signals are output to the TAPE and VCR
output terminals.
•Down-mixed analog signals converted into digital signals
are output from the OPTICAL 2, 3 and 4 digital output
terminals at this time.
1Press the ZONE3/REC SELECT button until
“RECOUT SOURCE” appears on the display.
2Press the INPUT MODE button to set the input
mode according to the source to be played.
3Press the DIRECT/STEREO button to set the
surround mode.
•The multichannel digital signals are down-mixed and
output to the TAPE and VCR output terminals.
4Set the recording mode.
•To cancel, turn the FUNCTION knob and select “SOURCE”.
•Recording sources other than digital inputs selected in the
REC OUT mode are also output to the ZONE3 audio/video
output terminals.
•When the REC OUT mode is selected, the ZONE3 button on
the remote control unit cannot be operated.
•When “ZONE2 SELECT” is selected at “Digital Out Assign”,
the source switches in association with the “ZONE2
SELECT” mode for the OPTICAL2 OUT connector (
page 111). 1The Dolby Headphone play mode is set when
headphones are connected to the PHONES jack
during playback in the DOLBY/DTS surround
mode.
•When this is done, signals encoded in the Dolby
Headphone mode are automatically output from the
recording output terminals (analog and digital) and
can be recorded.
2Select the parameters and set the desired
mode.
•Start recording.
Refer to the “Dolby Headphone” ( page 58).
NOTE:
•Do not disconnect the headphones during recording.
2Dolby Headphone recording
•When REC OUT mode is set to “SOURCE”, with the AVR-
4806 it is possible to output signals encoded in the Dolby
Headphone mode from the recording output terminal and
record them on a separate recorder.
