•A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High-Definition Multimedia
Interface) connector allows digital transfer of the digital images of DVD video and other sources, and the multi-channel sound
of DVD Audio and DVD Video.
•To provide audio output from AVR-4806’s audio output connector, select “Amp” at the System Setup.
To provide audio output from the TV, select “TV” at the System Setup. For details, see “Setting the HDMI/DVI In Assign” (
page 96, 97).
CC
DVD Video
Input signals
LINEAR PCM
DTS
Dolby Digital
DVD Audio
CC
LINEAR PCM
PACKED PCM
(with CPPM / without CPPM)
CC
CC
CC
CD LINEAR PCM
EE
Super Audio
CD
Multi area
CD area
Stereo area EE
CC
2Copyright Protection System
To play back the digital video and audio of DVD video and
DVD audio through an HDMI/DVI-D connection, both the
connected player and monitor are required to support a
copyright protection system called HDCP (High-bandwidth
Digital Content Protection System). HDCP is copy
protection technology that comprises data encryption and
authentication of the partner equipment.
The AVR-4806 supports HDCP. Please see the user’s
manual of your video display for more information about
this.
NOTE:
•The audio signals on the multi/stereo area of Super Audio CDs are not output. If the Super Audio CD is a hybrid CD, only
the audio signals in the CD area are output.
•Use a compatible player to play DVD Audio discs that are copyright protected by CPPM.
•Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, the
AVR-4806 cannot be controlled by another device via the HDMI connector.
•The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the
equipment that is connected.
•The video signals are not output properly if a device not compatible with HDCP is used.
•Use an HDMI monitor compatible with an HDMI input resolution of 480i or 576i.
•The video signals input from the HDMI or DVI-D input terminals are output to the HDMI monitor with their original
resolution, so the image will not be displayed if the resolutions of the input signal and the monitor being used are not
matched. In this case, change the setting of the resolution on the source device (player) to one which the monitor can
handle.
•For stable signal transfer, we recommend using cables that are a maximum of 5 meters in length.
The AVR-4806 is HDMI Ver. 1.1 compatible.
