73
12 LISTENING TO THE RADIO
If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
1Set the input function to “TUNER”.
2Watching the display, press the
BAND button to select the desired
band (AM or FM).
3Press the MODE button to set the
auto tuning mode.
4Press the TUNING + (up) or –
(down) button.
Auto tuning
“Auto” appears on the display.
Automatic searching begins, then
stops when a station is tuned in.
(Main unit) (Remote control unit)
Manual tuning
1Set the input function to “TUNER”.
2Watching the display, press the
BAND button to select the desired
band (AM or FM).
3Press the MODE button to set the
manual tuning mode.
Check that the display’s “AUTO”
indicator turns off.
(Main unit) (Remote control unit)
(Remote control unit)
(Remote control unit)
4Press the TUNING + (up) or – (down)
button to tune in the desired station.
The frequency changes continuously
when the button is held in.
(Remote control unit)
NOTES:
•When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.
•When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.