ENGLISH
Getting Started Connections Setup Remote Control Multi-zone Information Troubleshooting Specifi cations
Playback
Convenient Functions
HDMI Control Function
When AVR-2309CI is connected to a TV and player compatible with
HDMI control function, you can perform the following operations.
Settings other than AVR-2309CI settings must be made on the respective
devices. (Check the operating instructions of each device for details.)
NOTE
When using the HDMI control function, do not assign HDMI input to “TV/
CBL” by setting “Input Setup” – “Assign” – “HDMI In” in the menu.
• When you want to listen to TV audio by AVR-2309CI, connect optical
digital or analog (vpage 11).
If the TV you are using has both connection jacks, use the optical
digital connection.
• When using these functions set as follows: menu “Manual Setup”
– “HDMI Setup” – “HDMI Control” set to “ON” (vpage 26).
• AVR-2309CI power off can be linked to the TV power off step.
When you set “Output audio from amp” in the TV audio output setup
operation, you can switch the amp power on.
• You can switch audio output devices with a TV operation.
(When outputting from the TV speakers, output switches from
speakers connected to AVR-2309CI).
• You can adjust AVR-2309CI volume in the TV volume adjustment
operation.
• You can switch AVR-2309CI input source through linkage to TV input
switching.
• When playing the player, the AVR-2309CI input function switches to
the function of that player.
1Connect the HDMI to the AVR-2309CI with equipment
compatible with the HDMI control function.
2Put the power on for all the equipment connected to
the HDMI.
3Check the settings for all the equipment connected to
the HDMI and make HDMI available to them.
b Please consult the operating instructions for the connected
equipment to check the settings.
b Steps 1~3 do not have to be repeated once started.
b Carryout steps 2 and 3 should any of the equipment be plugged
out.
4Switch the television input to the HDMI connected to
the AVR-2309CI.
5Switch the AVR-2309CI input to the HDMI input
source and check if the picture from the player is ok.
6Put the television power on standby and check if the
AVR-2309CI goes into standby.
If the AVR-2309CI does not work please check the following.
• Is the menu “Manual Setup” – “HDMI Setup” – “HDMI Control”
(vpage 26) set to “ON”?
• Is the menu “Manual Setup” – “HDMI Setup” – “Power Off Control”
(vpage 26) set to “ON”?
• Is the control function used for the television HDMI properly set?
(Check the television operating instructions for details.)
• Should any of the operations below be performed, the interlocking
function may be reset, in which case, repeat step’s 2 and 3.
• Menu “Input Setup” – “Assign” – “HDMI In” (vpage 35) setting
has changed.
• There is a change to the connection between the equipment and
the HDMI, or an increase in equipment.
Operations
