583940
38
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
38 Maintenance
Checking and Cleaning the
Print Head
If your printouts are unexpectedly light, colors are
missing, or you see light or dark lines across the
page, you may need to clean the print head. This
clears the print head nozzles, which can become
clogged if you do not use the product for a long time.
Note:
Make sure the front tray is in the paper position (lower position)
and the CD/DVD tray is not inserted in the product (& page 8).
Tip:
We recommend that you turn on the product at least once a month
to maintain good print quality.
Checking the print head
You can print a nozzle check pattern to see if any
print head nozzles are clogged, or to check the results
after cleaning the print head.
1. Load A4-size plain paper (& page 8).
2. Press the F [Setup] button. (If you have just
finished cleaning the print head, you can start
the nozzle check by pressing the x Start button.)
3. Use the l or r button to select Maintenance,
then press OK.
4. Use the u or d button to select Nozzle Check,
then press OK.
5. Press the x Start button.
6. Examine the nozzle check pattern you printed.
Each staggered line should be solid, with no
gaps, as shown.
If your printout looks okay, the print head
does not need to be cleaned yet. Press OK to
return to the main menu.
If you see any gaps, as shown below, clean
the print head as described in the next
section.
Cleaning the print head
Follow these steps to clean the print head so it can
deliver ink properly. Before cleaning the print head,
run a nozzle check to see if the print head needs
cleaning (& “Checking the print head” on page 38).
Note:
Print head cleaning uses ink, so clean it only if quality declines.
If a message on the LCD screen tells you that a cartridge is
expended or low on ink, you cannot clean the print head. You
must first replace the indicated ink cartridge (& “Replacing Ink
Cartridges” on page 35).
1. Make sure the product is turned on but not
printing.
2. Press the F [Setup] button.
3. Use the l or r button to select Maintenance,
then press OK.
4. Use the u or d button to select Head Cleaning,
then press OK.
5. Press the x Start button to start cleaning the
print head.
The product begins cleaning the print head and
the Print head cleaning in progress. Please
wait. message appears on the LCD screen.
c Caution:
Never turn off the product while head cleaning is in progress.
You may damage it.
6. When cleaning finishes, a message displays on
the LCD screen. Then press the x Start button to
print a nozzle check pattern to check the results
(& “Checking the print head” on page 38).
If there are still gaps or the test patterns are faint,
run another cleaning cycle and check the nozzles
again.
Note:
If you do not see any improvement after cleaning about four
times, turn off the product and wait for at least 6 hours. This
lets any dried ink soften. Then try cleaning the print head
again. If quality still does not improve, one of the ink
cartridges may be old or damaged and needs to be replaced
(& Replacing Ink Cartridges” on page 35).
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denon AVR-1613 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denon AVR-1613 in de taal/talen: Engels als bijlage per email.

De handleiding is 23,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Denon AVR-1613

Denon AVR-1613 Snelstart handleiding - English - 10 pagina's

Denon AVR-1613 Gebruiksaanwijzing - Espanõl - 131 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info