Connecting Other Sources Connecting Other Sources
12
ENGLISH
ENGLISH
Connecting a VCR
•If you wish to perform analog dubbing from a digital source, such as a DVD recorder to an analog
recorder such as a cassette deck, you will need to connect the analog inputs and outputs as shown
below, in addition to the digital audio connections.
• Precaution when using S-terminals
This unit’s S-terminals (input and output) and video pin terminals (input and output) have independent
circuit structures, so that video signals input from the S-terminals are only output from the S-terminal
outputs and video signals input from the pin terminals are only output from the pin terminal outputs.
When connecting this unit with equipment that is equipped with S-terminals, keep the above point in
mind and make connections according to the equipment’s instruction manuals.
• The signals input to the color difference (component) video terminals are not output from the VIDEO
output terminal (yellow) or the S-Video output terminal.
•When recording to a VCR, it is necessary that the type of cable used with the playback source
equipment be the same type that is connected to the AVR-1507 VCR OUTPUT terminal.
Example: VCR IN → S-Video cable : VCR OUT → S-Video cable
VCR IN → Video cable : VCR OUT → Video cable
Connecting a CD player
To connect the digital audio output from the CD player, you can choose from either the coaxial or optical
connections. If you choose to use the optical connection, it needs to be assigned. For more information
about Digital Input Assignment ( page 21).
