12
ENGLISH
Input the type of components connected to the digital input terminals.
Setting the Digital In Assignment
1
Use the (left) and (right) buttons to assign the input function connected
to the COAXIAL input (COAXIAL) terminal.
(Initial)
(left) button (right) button
Press the ENTER or (down) button to switch the optical input (OPT) setting.
• Select “OFF” if nothing is connected.
2
Use the (left) and (right) buttons to assign the input function connected
to the OPTICAL input (OPT) terminal.
(Initial)
(left) button (right) button
Press the ENTER or (down) button if you want to start the settings over
from the beginning.
• Select “OFF” if nothing is connected.
NOTE: TUNER cannot be selected.
After setting up the system
1
Press the SYSTEM SETUP button to finish system set up.
This completes the system setup operations. Once the system is set up, there is no need to make the
settings again unless other components or speakers are connected to or the speaker layout is changed.
REMOTE CONTROL UNIT
11
Operating DENON audio components
3
Operate the audio component.
• For details, refer to the component’s operating instructions.
While this remote control is compatible with a wide range of infrared controlled components, some
models of components may not be operated with this remote control.
1. CD player (CD) and CD recorder and MD
recorder (CDR/MD) system buttons
2. Tape deck (TAPE) system buttons
6, 7 : Manual search
(reverse and forward)
2 : Stop
1 :Play
8, 9 : Auto search (Cue)
3 : Pause
DISC SKIP +: Switch discs
(for CD changers only)
6 : Rewind
7 : Fast forward
2 : Stop
1 : Forward play
0 : Reverse play
A/B : Switch between sides A and B
• Turn on the power of the different components before operating them.
1
Set mode switch 1 to “AUDIO”.
2
Set mode switch 2 to the position for the component to be
operated. (CD, CDR/MD or Tape deck)
3. Tuner system buttons
SHIFT : Switch preset channel range
CHANNEL +, – : Preset channel (up/down)
TUNING +, – : Frequency (up/down)
BAND : Switch between AM and FM bands
MODE : Switch between auto and mono
MEMORY : Preset memory
NOTE: TUNER can be operated when the switch is at “AUDIO” position.
