ENGLISH
30
(2) Quick setup procedure
• Refer to “Connections” (pages 8 to 14) and check that all the connections are correct.
1
Turn on the power.
• The power indicator (LED) lights green, the power turns on
and the display lights.
Several seconds are required from the time the power button is
pressed until the power turns on. This is due to the built-in muting
circuit that turns off (mutes) the sound when the power is turned
on and off. The power indicator flashes green while the muting
circuit is activated.
Even when the power button has been pressed again and the
power has been set to the standby mode, power is still supplied to
some circuits. When leaving home or traveling, be sure to unplug
the power cord from the power outlet. In the standby mode, the
power indicator is lit red. The indicator is orange when the timer is
set.
2
Press the SETUP button to display the
setup screen.
3
Use the
• and
ª cursor buttons to
select “Quick Setup”.
• The selected item is displayed in
yellow.
