Back to Contents Page
Camera Module
Dell™XPS™L502XServiceManual
Removing the Camera Module
Replacing the Camera Module
Removing the Camera Module
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the module cover (see Removing the Module Cover).
4. Remove the memory module(s) (see Removing the Memory Module(s)).
5. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).
6. Remove the keyboard (see Removing the Keyboard).
7. Remove the display assembly (see Removing the Display Assembly).
8. Remove the display bezel (see Removing the Display Bezel).
9. Disconnect the camera cable from the connector on the camera module.
10. Gently pry the camera module off the aluminium foil.
Replacing the Camera Module
1. Follow the instructions in Before You Begin.
2. Adhere the camera module to the aluminium foil.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
