Back to Contents Page
TV Antenna Connector
Dell™XPS™L701XServiceManual
Removing the TV Antenna Connector
Replacing the TV Antenna Connector
Removing the TV Antenna Connector
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the module cover (see Removing the Module Cover).
4. Remove the memory module(s) (see Removing the Memory Module(s)).
5. Follow the instructions in step 5 in Removing the Hard Drive(s).
6. Remove the optical drive (see Removing the Optical Drive).
7. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).
8. Remove the keyboard (see Removing the Keyboard).
9. Remove the display assembly (see Removing the Display Assembly).
10. Remove the Mini-Card(s) (see Removing the Mini-Card(s)).
11. Remove the bluetooth card (see Removing the Bluetooth Card).
12. Follow the instructions from step 13 to step 18 in Removing the Top Cover.
13. Disconnect the speaker cable from the connector on the I/O board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
