555707
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
6
GB
Self levelling laser
cross level
PRODUCT ELEMENTS 1
1 Exit opening for laser beam
2 Laser viewing glasses
3 On/Off switch
4 Latch of battery lid
5 Battery lid
6 Tripod
7 Laser warning label
8 Tripod mount 1/4"
TECHNICAL SPECIFICATIONS
Working range to approx. 5 m
Levelling accuracy ±0.5 mm/m
Self-levelling range, typically ±4°
Operating temperature +5 °C ... +40 °C
Storage temperature –20 °C ... +70 °C
Relative air humidity, max. 90 %
Laser class 2
Laser type 650 nm, <1 mW
Tripod mount 1/4"
Batteries 2 x 1.5 V LR6 (AA)
Weight 3.15 kg
SAFETY NOTES
Working safely with the measuring tool is
possible only when the operating and safety
information are read completely and the in-
structions contained therein are strictly followed.
SAVE THESE INSTRUCTIONS.
Caution – The use of other operating or adjusting
equipment or the application of other processing
methods than those mentioned here, can lead to
dangerous radiation exposure.
Do not direct the laser beam at persons or
animals and do not stare into the laser beam
yourself. This measuring tool produces laser
class 2 laser radiation according to IEC
60825-1. This can lead to persons being blinded.
Do not use the laser viewing glasses as safety gog-
gles. The laser viewing glasses are used for im-
proved visualisation of the laser beam, but they do
not protect against laser radiation.
Do not use the laser viewing glasses as sun glasses
or in traf c. The laser viewing glasses do not afford
complete UV protection and reduce colour percep-
tion.
Have the measuring tool repaired only through qual-
i ed specialists using original spare parts. This en-
sures that the safety of the measuring tool is main-
tained.
Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
FUNCTIONAL DESCRIPTION
Intended Use
The measuring tool is intended for determining and
checking horiontal and vertical lines.
The measuring tool is suitable exclusively for operation
in enclosed working sites.
ASSEMBLY
Inserting/Replacing the Battery
Use only alkali-manganese batteries.
To open the battery lid 5, press on the latch 4 and fold
the battery lid up. Insert the batteries. When inserting,
pay attention to the correct polarity according to the
representation on the inside of the battery compart-
ment.
Always replace all batteries at the same time.
Only use batteries from one brand and with the identi-
cal capacity.
Remove the batteries from the measuring tool when
not using it for extended periods. When storing for
extended periods, the batteries can corrode and dis-
charge themselves.
OPERATION
Initial Operation
Protect the measuring tool against moisture and di-
rect sun irradiation.
Do not subject the measuring tool to extreme tem-
peratures or variations in temperature.
As an example, do not leave it in vehicles for longer
periods. In case of large variations in temperature,
allow the measuring tool to adjust to the ambient
temperature before putting it into operation.
Avoid heavy impact to or falling down of the measur-
ing tool. Damage to the measuring tool can impair its
accuracy. After heavy impact or shock, compare the
laser line with a known horizontal or vertical refer-
ence line.
Switch the measuring tool off during transport. When
switching off, the levelling unit, which can be dam-
aged in case of intense movement, is locked.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Defort DLL-10T-K bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Defort DLL-10T-K in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info