7
Door trigger 1, grey lead
This input is normally open (NO) triggers the alarm when a contact to ground is made. Connect to the
existing door switch circuit of the car.
If the car has two separate circuits from the front and rear interior illumination, door trigger 2 (P-4.12)
can be used for the rear doors, and input P-4.5 can be used for the front doors.
P-4.6
Bonnet trigger, black/grey lead
This input is normally open (NO) and triggers the alarm when connected to ground, i.e. when the
bonnet is opened. Install DEFA Bonnet Switch. This should be installed in such a position as to
make it inaccessible from either the underside or the front of the car.
P-4.7
Light output 1, grey/red lead
Connected directly to the right turn signal lamp circuit in the car. Maximum load: 7.5 amp. (90 watt).
Fused with automatic circuit breaker.
P-4.8
Siren
Output to Siren.
Connect the two Siren leads to P4.8 and P4.9.
P-4.9
Siren
Output to Siren.
Connect the two Siren leads to P4.8 and P4.9.
P-4.10
Ignition signal, white/brown lead
Connect lead to ignition output of ignition switch.
P-4.11
Luggage compartment trigger, white lead
Connect to the normal luggage compartment switch if it is switched to ground. If it is switched to
positive, a DEFA Polarity Inverter must be used.
P-4.12
Door trigger 2, grey/white lead
This input is normally open (NO), and triggers the alarm when contacted to ground
This is an additional door switch input for NEGATIVE switches and is used particularly when there are
separate circuits for the front and rear doors.
P-4.13
DEFAnet
This output can control DEFA Power Module.
P-4.14
Light output 2, grey/black lead
Connected directly to the left turn signal lamp circuit in the car. Maximum load: 7.5 amp. (90 watt).
Fused with automatic circuit breaker.
