426922
22
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
17
ENGLISH
en - 5
Tighten the plunge limiter (4).
Position the Router on the cutting line. The outer
cutting edge of the cutter must coincide with the
cutting line.
Slide the parallel fence (16) against the workpiece
and tighten the locking bolts (17).
Fitting a guide bush (fig. F)
Together with a template, guide bushes play a
valuable part in cutting and shaping to a pattern.
Fit the guide bush (18) to the router base (11)
using the screws (19) as shown.
The screws (19) also hold the dust
extraction channel. Never operate the
router without this.
Connecting a dust extractor (fig. A)
Connect a dust extractor hose to the dust extraction
channel (9).
Instructions for use
Always observe the safety instructions
and applicable regulations.
Always move your Router as indicated in
fig. G (outer edges/inner edges).
Prior to operation:
Check that the cutter is correctly installed in the
collet.
Set the cutting depth.
Connect a dust extractor.
Always make sure the plunge limiter is locked
before switching ON.
Switching ON and OFF (fig. A)
Switch the tool ON using the ON/OFF-switch (1).
I = ON. The tool now works continuously.
O = OFF.
Loosen the plunge limiter and allow the
router carriage to regain its rest position
before switching OFF.
Using the guide bushes (fig. F)
Secure the template to the workpiece using end
clamps.
Select and install an appropriate guide bush (18).
Subtract the diameter of the cutter from the outside
diameter of the guide bush and divide by 2. This
will indicate how much larger the template should
be in relation to the part being recessed.
If the workpiece is not thick enough,
place it on a piece of waste wood.
Guiding off a batten
Where an edge guide cannot be used, it is also
possible to guide the Router along a batten clamped
across the workpiece (with an overhang at both ends).
Freehand routing
Your DEWALT Router can also be used without any
sort of guide, e.g. for signwriting or creative work.
Make shallow cuts only!
Use cutters with a max. diameter of 6 mm.
Routing with pilot cutters (fig. B)
Where a parallel guide or guide bush are
inappropriate, it is possible to use pilot cutters (20)
for cutting shaped edges.
Consult your dealer for further information on the
appropriate accessories.
These include finger jointing tools for dovetail and
finger jointing jigs, dowel jointing templates, guide
bushes, fine height adjusters, trammel bars and
guide rails in various lengths.
Maintenance
Your DEWALT Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt dw 613 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt dw 613 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info