549648
29
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
21
ENGLISH
en - 6
bit back out of a drilled hole. This will
help prevent jamming.
Prior to operation:
Make sure your battery pack is (fully) charged.
Insert the appropriate bit.
Mark the spot where the hole is to be drilled.
Select forward or reverse rotation.
Switching ON and OFF (fig. A & D)
To run the tool, press the variable speed switch
(1). The pressure exerted on the variable speed
switch determines the tool speed.
To stop the tool, release the variable speed
switch (1).
To lock the tool in OFF-position, move the
forward/reverse slider (2) to the central position.
The drill is equipped with a brake to stop
the chuck as soon as the variable speed
switch is fully released.
Screwdriving (fig. A)
Select forward or reverse rotation using the slider (2).
Set the collar (4) to position 1 and begin
screwdriving (low torque).
If the clutch ratchets too soon, adjust the collar
to increase the torque as required.
Drilling (fig. A)
Select the drilling mode using the collar (4).
Drilling in metal
Use a cutting lubricant when drilling metals. The
exceptions are cast iron and brass which should
be drilled dry.
Drilling in masonry
Use carbide-tipped masonry bits at low speeds.
Keep even force on the drill. A smooth, even flow
of dust indicates the proper drilling rate.
Drilling in wood
Holes in wood can be made with the same twist
drills used for metal. These bits may overheat
unless pulled out frequently to clear chips from
the flutes.
For larger holes use Power Drill wood bits.
Use a block of wood to back up workpieces that
may splinter.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Unplug the charger before cleaning the housing
with a soft cloth.
Remove the battery pack before cleaning your
Power Tool.
Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
Rechargeable batteries and the environment
DEWALT cordless tools and battery packs can be
charged many times to give long life and repeatedly
full power.
This symbol indicates that this tool contains nickel
cadmium (NiCd) cells. When your tool or battery
pack needs replacement, think of the protection of
our environment.
DEWALT recommends the following:
Discharge the energy from the batteries by
running the batteries down completely, then
remove them from the tool.
NiCd cells are recyclable, so do not throw them
away with your household waste. They may end up
in an incinerator or landfill, which must be avoided.
Instead, take the battery pack to a DEWALT
service centre, your local dealer or your local
recycling station. If necessary, contact your local
municipality for disposal information.
The collected batteries will be disposed of
properly and/or used for recycling purposes.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DW917K T 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DW917K T 2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info