546444
23
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
ENGLISH
21
Residual Risks
The following risks are inherent to the use of these saws:
injuries caused by touching the rotating parts
injuries caused by disruption of the saw blade
These risks are most evident:
within the range of operation
within the range of the rotating machine parts
In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be
avoided.
These are:
Impairment of hearing.
Risk of accidents caused by the uncovered parts of the rotating
saw blade.
Risk of injury when changing the blade.
Risk of squeezing fingers when opening the guards.
Health hazards caused by breathing dust developed when sawing
wood, especially oak and beech.
The following factors are of influence to noise production:
The material to be cut
The support of the material
The saw bend tension
The type of bandsaw blade
The feed force
Correct adjustment and regular maintenance of the guards.
Regular maintenance of the pulleys and the lubrication system.
Labels on tool
The following pictograms are shown on the tool:
Unplug the tool when not in use, before changing any
parts of the tools, accessories or attachments and before
servicing.
Check the direction of the blade.
Do not place your hands within this area
Carrying point.
DATE CODE POSITION (FIG. 1)
The Date Code, which also includes the year of manufacture, is printed
into the housing.
Example:
2012 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Partly assembled machine
1 Table
1 Rip fence
1 Box spanner (10–13 mm)
1 Pack containing:
1 Table insert
2 Blade guide blocks 45°
2 Blade guide blocks 90°
3 Coach bolts M8 x 60
4 Hex nuts M8
9 Washers D8
2 Washers D6
1 Hex bolt M8 x 60
4 Hex bolts M8 x 20
2 Hex bolts M6 x 65
2 Knobs
2 Fence clamp pieces
1 Hex key 2.5 mm
1 Hex key 6 mm
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual prior
to operation.
Description (fi g. 1)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
a. On/Off switch
b. Safety key
c. Blade guard
d. Table insert
e. Hinged cover
f. Blade tension adjuster
g. Blade centring adjuster
h. Cover retention bolts
i. Table tilt locking lever
j. Fence
k. Blade guard height adjuster
l. Upper blade guard/guide assembly
m. Motor location bolt
n. Blade speed adjuster (DW739)
o. Table
p. Mounting holes
nn. Push stick locations
Fig. 2
q. Rear blade support bearing
r. Locking grub screw for (q)
s. Blade guide blocks 45°
t. Locking grub screw for (s)
u. Blade guide blocks 90°
v. Locking grub screw for (u)
OPTIONAL ACCESSORIES (FIG. 3A)
w. Legstand
Fig. 3B
x. Mitre fence
y. Cut length gauge
INTENDED USE
Your DW738 / DW739 band-saw has been designed for professional
workshop application: It performs straight, contour, mitre and bevel cuts
on a wide range of materials such as wood, plastics, ferrous and non-
ferrous metals and leather.
The nominal band length is 2.095mm and a width between 3 and
16mm.
WARNING! Do not use the machine for other purposes as
described.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DW738 T 3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DW738 T 3 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 6,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info