546509
33
Verklein
Vergroot
Pagina terug
1/128
Pagina verder
ENGLISH
31
Before use, ensure the guards, brake, automatic return and locking
devices are functioning properly. Do not use the machine if these
devices are defective.
When sawing a round workpiece ALWAYS use suitable jig or prism
to prevent rotation of the workpiece.
Do not force the cutting action. (Stalling or partial stalling of the
motor can cause major damage.) Allow the motor to reach full
speed before cutting.
Do not lift the machine by its worktable.
Do not cut ferrous metals, non-ferrous metals or masonry.
Do not apply lubricants to the blade when it is running.
Do not place either hand in the blade area when the saw is
connected to the power source.
Do not reach around behind the saw blade when in use.
Do not place hands closer than 150 mm from the saw blade while
cutting.
Do not use damaged or cracked saw blades.
Replace the fence if damaged and/or no longer offers proper
support. The fence needs to be replaced periodically.
ALWAYS ensure safe operation. The radial arm saws needs to be
fixed to the floor with diameter 8 mm bolts with a minimum length
of 80 mm.
WARNING! When cutting round workpiece it is necessary
to secure the workpiece against rotation by using jig or
holder.
Do not use the machine in locations where the temperature may
reach –5˚ or 40˚ C. Suitable temperature is 20˚ C.
Operators shall be instructed on factors influencing exposure to
noise (e.g. use of saw blade designed to reduce the emitted noise
and machine maintenance). Report faults in the machine, including
guards or saw blade, as soon as they are discovered. Ensure the
operator is adequately trained in use, adjustment and operation of
the machine.
Connect the machine to a dust collection device when sawing
wood. Always consider factors which influence exposure of dust
such as:
Type of material to be machined (chip board produces more
dust than wood).
Correct adjustment of saw blade.
Ensure that the local extraction as well as hoods, baffles and
chutes are properly adjusted.
Always wear working gloves when servicing the machine, handling
rough workpieces or changing the saw blade.
If a voltage failure occurs under idle condition, release the handle
immediately ensuring the saw head moves automatically back to its
rest position.
WARNING! Defect electrical wiring needs to be replaced
immediately.
WARNING: To reduce the risk of injury, turn unit off
and disconnect machine from power source before
installing and removing accessories, before adjusting or
changing set-ups or when making repairs. Be sure the
switch is in the OFF position An accidental start-up can
cause injury.
Report the failure and mark the machine in suitable form to prevent
other people from using the defective machine.
When the saw blade is blocked due to abnormal feed force during
cutting, turn the machine off and disconnect it from power supply.
Remove the workpiece and ensure that the saw blade runs free.
Turn the machine on and start new cutting operation with reduced
feed force.
Residual Risks
The following risks are inherent to the use of radial arm saws:
In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be
avoided.
These are:
Injuries caused by touching rotating parts.
Impairment of hearing.
Risk of accidents caused by the uncovered parts of the rotating
saw blade.
Risk of injury when changing the blade.
Risk of squeezing fingers when opening the guards.
Health hazards caused by breathing dust developed when sawing
wood, especially oak, beech and MDF.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
When the power cord is damaged disconnect the plug
from the power source immediately.
Always disconnect the plug before making any
adjustments or perform service/maintenance.
Package Contents
The package contains:
1 Partly assembled radial arm saw
2 Table strips (1 right,1 left)
2 Fences (1 right, 1 left)
2 Table extensions (1 right, 1 left)
1 Dust shroud
1 Box containing:
1 legstand
(4 legs, 4 traverse rails, 24 M8 x 16 bolts, 24 M8 nuts
and 48 D8 flat washers)
1 Skinpack containing:
1 spanner 10/13 mm
1 spanner 22 mm
1 socket wrench 13 mm
4 hex keys (3, 4, 5, 6 mm)
1 height adjustment crank
1 M4.2 x 16 cross head screw
4 table extension supports
19 M8 x 25 bolts
19 D8 flat washers
19 M8 nuts
1 rubber insert
6 wood inserts
3 M8 x 16 screws
3 D8 washers
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual prior
to operation.
Description (fi g. 1)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DW721KN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DW721KN in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info