546150
31
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
ENGLISH
29
Cutting Base Mouldings
The cutting of base moulding is performed at a 45° bevel angle.
Always make a dry run without power before making any cuts.
All cuts are made with the back of the moulding laying flat on the
saw.
INSIDE CORNER
Left side
Position the moulding with top of the moulding against the fence.
Save the left side of the cut.
Right side
Position the moulding with the bottom of the moulding against the
fence.
Save the left side of the cut.
OUTSIDE CORNER
Left side
Position the moulding with the bottom of the moulding against the
fence.
Save the right side of the cut.
Right side
Position the moulding with top of the moulding against the fence.
Save the right side of the cut.
Cutting Crown Mouldings
The cutting of crown moulding is performed in a compound mitre.
In order to achieve extreme accuracy, your saw has pre-set angle
positions at 31.62° mitre and 33.85° bevel. These settings are for
standard crown mouldings with 52° angles at the top and 38° angles
at the bottom.
Make test cuts using scrap material before doing the final cuts.
All cuts are made in a left bevel and with the back of the moulding
against the base.
INSIDE CORNER
Left side
Top of the moulding against the fence.
Mitre right.
Save the left side of the cut.
0 5 10 15 20 25 30 35 40 45
0 5 10 15 20 25 30 35 40 45
5
10
15
20
25
30
35
40
45
5
10
15
20
25
30
35
40
5
10
1
5
2
0
25
30
3
5
40
45
50
5
5
60
65
7
0
75
80
85
5
10
1
5
20
25
30
35
40
4
5
5
0
55
60
6
5
7
0
75
80
85
5
1
0
1
5
20
25
30
35
4
0
4
5
50
5
5
6
0
65
7
0
7
5
80
85
SET THIS BEVEL ANGLE ON SAW
SET THIS MITER ANGLE ON SAW
ANGLE OF SIDE OF BOX (ANGLE"A")
SQUARE BOX
6 SIDED BOX
8 SIDED BOX
Right side
Bottom of the moulding against the fence.
Mitre left.
Save the left side of the cut.
OUTSIDE CORNER
Left side
Bottom of the moulding against the fence.
Mitre left.
Save the left side of the cut.
Right side
Top of the moulding against the fence.
Mitre right.
Save the right side of the cut.
GROOVING (FIG. T)
Your saw is equipped with a grooving stop (12) and grooving depth
adjustment knob (15) to allow for groove cutting.
Flip the grooving stop (12) towards the front of the saw.
Adjust the grooving depth adjustment knob (15) to set the depth of
the groove cut. It might be necessary to release the lock nut (66)
first.
Place a piece of scrap material of approx. 5 cm between fence and
workpiece in order to perform a straight groove cut.
DUST EXTRACTION (FIG. A2 & A5)
This machine is provided with a dust extraction point (24) for connection
of a dust extraction kit (36) (available as an option).
Whenever possible, connect a dust extraction device designed in
accordance with the relevant regulations regarding dust emission.
CUTTING SMALL PIECES (FIG. J1)
The upper part of the left side of the fence (3) can be adjusted to
provide maximum support when cutting small pieces.
Put the saw blade into vertical position.
Loosen the plastic knob (29) at least 3 full turns.
Adjust the fence as close to the blade as possible.
Tighten the knob securely.
SUPPORT FOR LONG PIECES (FIG. A4)
Always support long pieces.
For best results, use the extension work support (35) to extend the
table width of your saw (available from your dealer as an option).
Support long workpieces using any convenient means such as
saw-horses or similar devices to keep the ends from dropping.
SAW BLADES
To obtain the stated cutting capacities, always use 216 mm saw blades
with 30 mm arbor holes. Consult your dealer for further information on
the appropriate accessories.
TRANSPORTING (FIG. B2)
In order to conveniently carry the tool, a carrying strap can be attached
to the base. The carrying strap (see fig. A6) is available as an option.
To transport the saw, lower the head and depress the lock down
pin (14).
Lock the rail lock knob with the saw head in the front position, lock
the mitre arm in the right mitre angle, slide the fence (3) completely
inward and lock the bevel lever (11) with the saw head in the
vertical position to make the tool as compact as possible.
Always use the hand indentations (30) shown in fig. B2 to transport
the saw.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DW712N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DW712N in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info