english
20
TABLE TOP MITRE SAW
DW711
EC-Declaration of conformity
DW711/DW711-LX
D
eWA LT declares that these Power Tools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029-1,
EN 61029-2-11, EN 55014, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
For more information, please contact D
eWA LT at the address below or refer
to the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EEC, measured
according to EN 61029-2-11:
DW711 DW711-LX
L
pA
(sound pressure) dB(A)* 89 89
L
WA
(acoustic power) dB(A) 102 102
*at the operator’s ear
WARNING: Take appropriate measures for the protection
of hearing.
Weighted root mean square acceleration value according to
EN 61029-2-11:
DW711 DW711-LX
< 2.5 m/s
2
< 2.5 m/s
2
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Cert. No.
BM 60013858 0001
Horst Grossmann
Vice President Engineering and Product Development
DeWA LT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
Safety Instructions
WARNING: When using stationary power tools, always observe
the safety regulations applicable in your country to reduce the
risk of fire, electric shock and personal injury. Read all of this
manual carefully before operating the tool. Save this manual for
future reference.
General
1. Keep work area clean.
Cluttered areas and benches can cause accidents.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the tool in damp or wet
conditions. Keep the work area well lit (250 - 300 Lux). Do not use
the tool where there is a risk of causing fire or explosion, e.g. in the
presence of flammable liquids and gases.
3. Keep children away.
Do not allow children, visitors or animals to come near the work area or
to touch the tool or the mains cable.
Congratulations!
You have chosen a DeWA LT tool. Years of experience, thorough product
development and innovation make DeWA LT one of the most reliable
partners for professional power tool users.
Technical data
DW711 DW711-LX
Voltage V 230 115
Power input W 1300 1100
Power output W 900 800
Max. blade speed min
-1
2,950 2,950
blade diameter mm 247-260 247-260
blade bore mm 30 30
Blade body thickness mm 2.0 2.0
Riving knife thickness mm 2.3 2.3
Riving knife hardness mm 43 ±5 43 ±5
Weight kg 20 20
CUTTTING CAPACITIES
Mitre saw mode
Mitre (max. positions) left 50˚ 50˚
right 50˚ 50˚
Bevel (max. positions) left 48˚ 48˚
right 0˚ 0˚
At 90˚, at max. height 50 mm,
max. width of cut mm 134 134
At 45˚ mitre, at max. height 50 mm,
max. width of cut mm 94 94
At 45˚ bevel, at max. height 45 mm,
max. width of cut mm 134 134
At 90˚, at max. depth of cut 96 mm, max width 20 mm, max. cut off 15 mm
Saw bench mode
Max. depth of cut mm 0-50 0-50
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicatesanimminently
hazardoussituationwhich,ifnotavoided,will result in death or
serious injury.
WARNING:Indicatesapotentiallyhazardoussituationwhich,if
not avoided, could result in death or serious injury.
CAUTION:Indicatesapotentiallyhazardoussituationwhich,if
not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentiallyhazardoussituationwhich,ifnotavoided,may result
in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
