790944
25
Verklein
Vergroot
Pagina terug
1/232
Pagina verder
25
GB
The back of the grade rod is designed to measure the height of
ceilings, joists, etc. Fully extend the top section of the grade rod until
the button locks into the previous section. Extend that section either
until it locks into the adjacent section or until the grade rod touches
the ceiling or joist. The height is read where the last extended section
exits the previous lower section (Figure Q).
Target Card
Some laser kits include a Laser Target Card (Figure R) to aid in
locating and marking the laser beam. The target card enhances the
visibility of the laser beam as the beam crosses over the card. The
card is marked with standard and metric scales. The laser beam
passes through the red plastic and reflects off of the reflective tape
on the reverse side. The magnet at the top of the card is designed to
hold the target card to ceiling track or steel studs to determine plumb
and level positions. For best performance when using the Target
Card, the DeWALT logo should be facing you.
Laser Enhancement Glasses
Some laser kits include Laser En hancement Glasses (Figure S).
These glasses improve the visibility of the laser beam under bright
light conditions or over long distances when the laser is used for
interior applications. These glasses are not required to operate the
laser.
CAUTION:
These glasses are not ANSI approved safety glasses and
should not be used while operating other tools. These
glasses do not keep the laser beam from entering your
eyes.
CAUTION:
To reduce the risk of serious injury, never stare directly into
the laser beam with or without these glasses.
Maintenance
Laser Cleaning and Storage
Under some conditions, the glass lens may collect some dirt or
debris. This will affect beam quality and operating range. The lens
should be cleaned with a cotton swab moistened with water.
The flexible rubber shield can be cleaned with a wet lint-free
cloth such as a cotton cloth. USE WATER ONLY — DO NOT use
cleansers or solvents. Allow the unit to air dry before storing.
To maintain the accuracy of your work, check the calibration of the
laser often. Refer to Checking the Calibration.
Calibration checks and other maintenance repairs can be
performed by DEWALT service centers. Two free calibration checks
are included under the DEWALT One Year Free Service Con tract.
When the laser is not in use, store it in the kit box provided.
Do not store your laser in the kit box if the laser is wet. Dry exterior
parts with a soft, dry cloth and allow the laser to air dry.
Do not store your laser at temperatures below 0˚F (-18˚C) or above
105˚F (41˚C).
WARNING:
Never use solvents or other harsh chemicals for cleaning
the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any
liquid get inside the unit; never immerse any part of the unit
into a liquid. Never use compressed air to clean the laser.
Detector Cleaning and Storage
Dirt and grease may be removed from the exterior of the detector
using a cloth or a soft, non-metallic brush.
The DEWALT Digital Laser Detector is waterproof. If you should
drop the detector in mud, wet concrete, or a similar substance,
simply hose the detector off. Do not use high pressure water (e.g.,
from a pressure washer).
The best storage place is one that is cool and dry, and away from
direct sunlight and excess heat or cold.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DCE080GS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DCE080GS in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 23.25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info