544648
34
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
ENGLISH
32
i. Side handle clamp
j. Steel ring
k. Bush
l. Tool holder
m. Locking sleeve
n. Pin
o. Collar
p. Side handle knob
INTENDED USE
D25501, D25601, D25602, D25603
Your rotary hammer has been designed for
professional rotary drilling and chipping applications.
D25820, D25831
Your chipping hammer has been designed for
professional chipping, chiselling and demolition
applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These hammers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Soft Start Feature
D25601, D25602, D25603, D25831
The soft start feature allows the tool to accelerate
slowly, thus preventing the drill bit from walking off
the intended hole position when starting.
The soft start feature also reduces the immediate
torque reaction transmitted to the gearing and the
operator if the hammer is started with the drill bit in
an existing hole.
Electronic Speed and Impact Control
(fi g. 1, 3)
D25601, D25602, D25603, D25831
The electronic speed and impact control (g) offers
the following advantages:
use of smaller accessories without risk of
breakage;
minimised break-out when chiselling or drilling in
soft or brittle materials;
optimal tool control for precise chiselling.
Torque Limiting Clutch
WARNING: The user must always
maintain a firm grip on the tool when in
operation.
The torque limiting clutch reduces the maximum
torque reaction transmitted to the operator in case
of jamming of a drill bit. This feature also prevents
the gearing and electric motor from stalling.
NOTICE: Always turn the tool off before
changing torque control settings or
damage to tool may result.
COMPLETE TORQUE CONTROL (CTC) (FIG. 3)
D25602
Complete Torque Control (CTC) offers the user a
two-stage mechanical clutch with adjustable torque
options. Adjusting the torque provides increased
control for various applications.
The low setting (40Nm) allows the tool to operate at
a reduced torque level increasing control for many
solid drilling applications. The high setting (80Nm) is
available for more demanding applications such as
core drilling and the use of large diameter solid bits.
Refer to Setting the Two Stage Mechanical
Clutch for more information.
ULTIMATE TORQUE CONTROL (UTC) (FIG. 3)
D25603
In addition to the two-stage mechanical clutch,
Ultimate Torque Control (UTC) offers increased
user comfort and safety through an on-board,
anti-rotation technology capable of detecting if
the user loses control of the hammer. When a jam
is detected, the torque and speed are reduced
instantly. This feature prevents self rotation of the tool
reducing the occurrence of wrist injuries.
Service Indicator LEDs (fi g. 1, 3)
D25601, D25602, D25603, D25831
The yellow brushwear indicator LED (q) lights up
when the carbon brushes are nearly worn out to
indicate that the tool needs servicing within the next
8 hours of use.
D25601, D25602, D25603
The red service indicator LED (r) lights up if the
lock-on button (b) is used in any mode except the
chipping mode. On models fitted with Ultimate
Torque Control (UTC), the red LED indicator (r) lights
up if the anti-rotational device is activated. The red
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt D25601K bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt D25601K in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 7,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info