544498
25
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
25
ENGLISH
Hammering only: for light chipping,
chiselling and demolition applications.
In this mode the tool can also be used as
a lever to free a jammed drill bit.
To select the operating mode, press the safety
lock (5) and rotate the mode selector switch (4)
until it is points to the symbol of the required mode.
Release the safety lock and check that the mode
selector switch is locked in place.
Indexing the chisel position
The chisel can be indexed and locked into 8 different
positions (fig. D2).
Rotate the mode selector switch (4) until it points
upward.
Rotate the chisel in the desired position.
Set the mode selector switch (4) to the
“hammering only” position.
Twist the chisel until it locks in position.
Setting the electronic speed and impact control
dial (fig. B)
Turn the dial (2) to the desired level. The higher
the number, the greater the speed and impact
energy. With dial settings from “1” (low) to “5”
(full power) the tool is extremely versatile and
adaptable for many different applications.
The required setting is a matter of experience.
E.g.:
- when chiselling or drilling in soft, brittle
materials or when minimum break-out is
required, set the dial to “1” or “2” (low);
- when breaking or drilling in harder materials,
set the dial to “5” (full power).
D25600
With dial settings from “1” to “7” the tool allows a
further fine-adjustment to the choice of application.
Assembling and fitting the side handle (fig. E1 - E4)
The side handle (8) can be mounted in front or in
rear position on either side of the machine to suit
both RH- and LH-users.
Always operate the tool with the side
handle properly assembled.
Mounting in front position (fig. E1 & E2)
Snap the steel ring (16) over the collar (7) behind
the tool holder (6). Squeeze both ends together,
mount the bush (14) and insert the pin (15).
Place the side handle clamp (13) and screw on
the clamp wheel (9). Do not tighten.
Screw the side handle (8) into the clamp wheel
and tighten it.
Rotate the side handle mounting assembly to the
desired position. For drilling horizontally with a
heavy drill bit, we recommend to place the side
handle at an angle of approx. 20° for optimum
control (fig. E2).
Lock the side handle mounting assembly in place
by tightening the clamp wheel (9).
Mounting in rear position (fig. E3 & E4)
The rear position is particularly useful when drilling
overhead or down into a floor. Refer to fig. D4.
Unscrew the side handle (8) and remove it from
the front position. Leave the side handle
mounting assembly in front position so that the
depth adjustment rod can still be used.
Screw the side handle directly into one of the
rear side handle positions (10) on either side of
the tool.
Setting the drilling depth (fig. F)
Insert the required drill bit.
Loosen the clamp nut (17) and fit the depth
adjustment rod (11) through the hole in the side
handle clamp.
Push the drill bit into a surface at a right angle and
adjust the depth adjustment rod (11) as shown.
Tighten the clamp nut (17).
Instructions for use
Always observe the safety instructions
and applicable regulations.
For your own safety, always use the tool
with both hands.
Be aware of the location of pipework and
wiring.
Apply only a gentle pressure to the tool
(approx. 20 kg). Excessive force does
not speed up drilling or chiselling but
decreases tool performance and may
shorten tool life.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt D25500K T-1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt D25500K T-1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Pools, Turks, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info