Car/motorcycle motors and bicycles
Tools: crevice tool
Steam output: maximum setting
N.B. On request, the machine may be
equipped with a special bottle-
cleaning nozzle (fig.6a) and wallpaper-
removing accessory (fig.6b).
REFILLING THE WATER
CHAMBER
The water chamber can be refilled only when
steam output has stopped. Proceed as follows:
•Turn off the machine by depressing the
on/off switch and disconnect from the mains.
•Wait several minutes before refilling the
chamber so as to avoid sudden changes in
temperature.
• Place a cloth over the cap before opening.
Open slowly and carefully, allowing any
residual steam to escape. Refill the tank as
described above.
USING THE IRON
(where provided)
To start the steam generator, proceed as
described above.
N.B. A professional iron can be
supplied with your steam cleaner on
request.
SETTING UP THE IRONING SYSTEM
To connect the iron to the machine:
• open the hatch (7) on the appliance;
• fit the iron coupling into its slot, pressing in
firmly until the locking button clicks;
• make sure the coupling is firmly in place by
trying to remove it without pressing the
locking button.
To switch the machine on, follow the
instructions described above.
Adjust the iron thermostat to the required
position (fig. 7).
18
7
ba
6
