tainer in order to stop it deteriorating. It is good practice to
keep oil used for frying fish separate from that used for frying
other food.
In the event of solid fat or lard being used, be careful not
to let it cool down too much or it will solidify.
Models with oil drainage hose and oil container
1. Pull the frame outwards (as in fig. 14).
2. Place oil container without the lid in the special compartment
(fig. 15).
3. Remove the basket.
4. Open door for drain hose storage (as in fig. 16).
5. Insert oil filter onto the container (fig. 16)
6. Extract drainage hose, remove cap while at the same time
squeezing the hose between two fingers to avoid the liquid
coming out until it has been positioned above the filter (see fig.
17).
7. Flow the oil into the oil container. Pinch the oil drainage hose
between two fingers to regulate the flow and avoid the oil lea-
king out of the openings “X” (see fig. 18).These openings are
provided to prevent the oil overflowing from the filter tray if it
drains too fast or the filter is clogged. In this case, filtering will
not be optimum. If the oil is particularly “dirty”, be careful to
ensure that it does not overflow from the filter.
8. At the end of the procedure reposition the hose in its com-
partment after replacing the cap and close the inspection door.
9. Put down the container, stopping it with lid in order to ensure
better preservation of the oil for future use.
10. Reposition the box as at the beginning.
11. Remove any deposits from the tank using a sponge or absor-
bent paper.
In the event of fat being used, be careful not to let it cool
down too much or it will solidify.
Replacing the odour-eater filter
With time the odour-eater filters placed inside the lid lose their
effectiveness.A change of colour in the filter, visible through hole
“A” of fig. 9 on the inside lid, shows that the filter needs to be
changed.To replace it, remove plastic filter cover (fig. 19). Replace
the filters.
Warning: The white filter must rest on the metal part (fig. 20)
and the coloured area must face upwards (or towards the black fil-
ter).
Reassemble the filter cover, being careful to insert the front hooks
correctly (as shown in fig. 20).
fig. 13
fig. 14
fg. 15
fg. 16
fg. 17
Electric deep fryer F18
6
