7
DISPENSING HOT WATER
(to make tea, stock, etc.)
- Turn on the machine by pressing the ON/OFF
switch and wait for the “OK” light to come on.
- Place a glass or cup under the steam spout.
- Press the dispensing switch while opening the
steam lever.
- Hot water will be dispensed from the spout.
When enough water has been delivered, close
the lever and turn off the dispensing switch
and “ON-OFF” switch.
CLEANING AND MAINTENANCE
- Before performing any cleaning or maintenan-
ce operation, always turn off the machine,
pulling the plug out of the mains socket, and
allow it to cool down .
- Do not use solvents, detergents or abrasives to
clean the machine. Simply use a damp, soft
cloth.
- Regularly clean the filter cup, filters, drip tray
and water tank.
- Do not wash the machine: it is an electrical
appliance.
-Do not put the components or accessories in
the dishwasher.
DESCALING
You are advised to descale the machine every 4-8
months, or as required by the hardness of the
water or frequency of use. We recommend desca-
ling with water and vinegar as follows:
- Fill the tank with water, diluting 8 tablespoons
of vinegar in it.
- Operate the machine as though making coffee
until the tank has been emptied, then rinse.
- Repeat the operation with water only for 2-3
tanks, rinsing until there is no longer any smell
of vinegar.
Descaling with other substances may be
hazardous to your health.
A) If your appliance comes fitted with a plug, it will incorporate a 13
Amp fuse. If it does not fit your socket, the plug should be cut off
from the mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after remo-
ving the fuse: do not insert in a 13 Amp socket elsewhere in the
house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be
protected by a 15 Amp fuse.
If the plug is a moulded-on type, the fuse cover must be re-fitted
when changing the fuse using a 13 Amp Asta approved fuse to BS
1362. In the event of losing the fuse cover, the plug must NOT be
used until a replacement fuse cover can be obtained from your nea-
rest electrical dealer. The colour of the correct replacement fuse
cover is that as marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow the instruc-
tions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with the fol-
lowing code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not correspond with
the coloured markings identifying the terminals in your plug, proceed as
follows:
The green and yellow wire must be connected to the terminal in the plug
marked with the letter E or the earth symbol or coloured green or
green and yellow.
The blue wire must be connected to the terminal marked with the letter
N or coloured black.
The brown wire must be connected to the terminal marked with the letter
L or coloured red.
