SLEEP
FUNCTION (FIG. 26)
This function is ideal for the night as it gradually reduces opera-
tion of the appliance.
To set this function correctly:
• Select the operating mode (air conditioning, dehumidifying,
smart or heating (certain models only) as described above.
•Press the button. The appliance operates in the previously
selected mode with low fan speed.
The SLEEP function maintains the room at optimum temperature
without excessive fluctuations in either temperature or humidity
and with silent operation.
Fan speed is always at minimum, while room temperature and
humidity vary gradually to ensure the most comfortable condi-
tions. During air conditioning, the temperature increases by 1°C
after 60 minutes and a further 1°C after 2 hours.
In dehumidifying mode, the dehumidifying power of the
appliance is partially reduced every hour for the first two hours.
In heating mode, the temperature drops by 1°C every hour, three
times.
IONISER
FUNCTION (CERTAIN MODELS ONLY) (FIG. 27)
The ioniser is an electronic component which releases negative
ions into the air. Rooms with a clean pleasant atmosphere have
been shown to have an abundance of negative ions, while
rooms with stale air contain abundant positive ions.
The ioniser restores the correct balance between the two types
of ion, reducing dust in the air and generating a pleasant sensa-
tion of well-being. This button activates the ioniser present in cer-
tain models. This function can be activated in all operating
modes.
WATERSAVE FUNCTION (FIG. 28)
This function is designed to increase the operating time of the
appliance when operating in water mode and can be activated
in air conditioning and SMART mode.
When the button is pressed, the appliance is slightly less efficient,
but consumption of water in the tank is considerably reduced.
With a full tank, the appliance normally operates for six hours.
With this function activated, the operating time increases to 10
hours, avoiding the need to top up frequently.
If the water runs out when this function is active, the quantity of
air given out from the rear hose increases and the light
comes on. To restore operation in water mode, fill the tank.
SWING FUNCTION
Not available in these models.
34
26
27
28
