19
Operation
TURNING THE APPLIANCE ON
Plug the appliance into the mains.
Press the ON/OFF button (A) (when turned on, the air conditioner
starts operating in the same mode as when it was turned off).
The display shows the room temperature.
Press the MODE button (B) until the indicator light corresponding
to the required mode lights up:
Light (O): air-conditioning mode
Light (N): fan mode
Light (P): dehumidifying mode
AIR-CONDITIONING MODE
Ideal for hot humid weather when you need to cool and dehu-
midify the room.
By default, the room temperature is displayed.
Light (S) is on.
To set the required temperature, press the + (E) or - (F) buttons
until the required temperature is displayed. (to switch between °F
and °C, press the E and F buttons together for a few seconds).
Light (T) comes on and light (S) goes off.
Fifteen seconds after setting the temperature, the display swit-
ches back to room temperature.
Light (S) comes on again.
You can adjust temperature in air conditioning mode only.
Then select the fan speed by pressing the FAN button (C) until
the indicator light corresponding to the required fan speed lights
up:
MAX: the air conditioner operates at maximum to reach the
required temperature as rapidly as possible
MED: reduces noise levels but still maintains a good level of
comfort
MIN: for silent operation
The most suitable temperature for the room during the summer
varies from 24 to 27°C. You are recommended, however, not to
set a temperature much below the outdoor temperature.
GB
