30
Using the remote control unit
AIR-CONDITIONING MODE (COOL)
Ideal for hot humid weather when you need to cool and dehumidify the room.
In air-conditioning mode, use the buttons to select the desired temperature .
The display shows the set temperature.
To change the fan speed, use the FAN button (17) on the remote control, choosing from the avai-
lable speeds:
AUTO: the appliance automatically selects the most suitable fan speed in relation to the tem-
perature set on the digital display.
HIGH: the air conditioning unit operates at maximum to reach the required temperature as
rapidly as possible
MED: reduces noise levels but still maintains a good level of comfort
LOW: for silent operation
Two arrows on the display indicate respectively "COOL" and the fan speed.
The most suitable temperature for the room during the summer varies from 24 to 27°C. You are
recommended, however, not to set a temperature much below the outdoor temperature.
DEHUMIDIFYING MODE
Ideal to reduce room humidity while avoiding temperature variations (spring and autumn, damp
rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed automatically.
Two arrows on the remote control display indicate "DRY" and "AUTO" respectively.
FAN MODE ONLY (FAN)
In fan mode, fan speed can be set by pressing the FAN button (17).
La velocità di ventilazione cambia a rotazione fra quelle disponibili (LOW/MED/HIGH).
Due frecce nel display indicano la funzione “FAN” e la velocità impostata.
In questa modalità non è possibile selezionare la velocità AUTO.
HEATING MODE (CERTAIN MODELS ONLY)
To set operation of the appliance correctly, press the buttons until the desired temperature is
displayed. In heating mode, the fan speed is selected automatically by the appliance.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown. This avoids wasting electricity by
optimising operating periods.
How to programme delayed shutdown
•With the air-conditioning unit on, press the TIMER button (20). The time is displayed and the "h"
symbol flashes, with a flashing arrow indicating "TIMER OFF".
• Set the time when you want the appliance to go off using the buttons (from 30 minutes to
24 hours). During the first ten hours, you can select half hour intervals. For times greater than
ten hours, one hour intervals can be selected.
•Press the TIMER button again to confirm the selection. A beep sounds and the time set is also
displayed on the control panel, confirming setting of the timer. A countdown of the time left is
displayed on both the air conditioner and remote control displays. At the end of the set time
the appliance switches off automatically.
•To cancel the timer programme, press the TIMER button again. The appliance emits a beep
and both displays reset to display the settings prior to activation of the timer.
