7
PREPARING FOR USE
The instructions below will enable you to prepare your air condi-
tioner for operation as efficiently as possible.
Before use, make sure the air intake and outlet grilles are unob-
structed.
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is ensured with your
appliance:
• Fit the air exhaust hose in the housing at the back of the
appliance (fig. 1).
• Fit the window outlet to the end of the hose.
• Place the air conditioner near a window or French window.
• Adjust the length of the hose to reach the window.
• Make sure the air exhaust hose is unobstructed.
• Open the window or French window slightly and position the
outlet (fig. 2).
• If you have a double window, use the sucker provided to hold
the two parts of the window together (fig. 3).
• If you have a sash window, place the window bracket on the
window sill, extend the bracket fully within the window frame,
fix the bracket by using the pin then lower the window onto
the bracket. Insert the window outlet of the exhaust hose into
the slot, then connect the hose to the air conditioner (fig. 4).
• Thanks to the locking pins, it’s possible to use the window
bracket also for sliding windows. Position the hole of the brac-
ket so to allow a correct installation of the exhaust hose (see
figure 5).
Keep the air hose as short and free of curves as possible to avoid
bottlenecks.
