Handleiding DeLonghi Maestosa - EPAM960.55 (pagina 10 van 25) (Engels)

821514

Verklein

Vergroot

Pagina terug

1/25

Pagina verder

11.2 Customising the beverages

To deliver the desired quantity of hot water, proceed as follows:

1. Press (B5) at the bottom of the image corresponding

to hot water. The selectable quantities appear on the dis-

play (B1):

"Quantity"

2. After selecting the quantity, press : The appliance

proceeds with preparation and the image of the beverage

appears on the display together with a progress bar which

gradually lls as the operation proceeds and a description

of the phase (water delivery).

3. At the end of delivery, the message: "Your beverage is

ready! Save new settings?" is displayed;

4. Press "Save" to save the settings (or "Cancel" to retain the

previous parameters).

The appliance is now ready to be used again.

Please note!

• If "Energy Saving" mode is active, you may have to wait a few

seconds before the hot water is delivered.

• To interrupt delivery of hot water manually, press "Stop"

and "Cancel".

12. STEAM DELIVERY

To deliver steam, proceed as follows:

1. Attach the hot water/steam spout (F) to the connection

nozzles (A9) (g. 7): the appliance beeps (if the beep func-

tion is enabled);

2. Fill a container with the liquid to be heated or frothed and

immerse the hot water/steam spout in the liquid (g. 29);

3. Press the image on the homepage (B) corresponding to

steam. The appliance proceeds with preparation and the

image of the beverage appears on the display (B1) togeth-

er with a progress bar which gradually lls as the operation

proceeds and a description of the phase (steam delivery);

4. When the required temperature or level of froth is ob-

tained, interrupt steam delivery by pressing "Stop" or

"Cancel".

Important!

Always shut o the steam before the container with the heated

liquid is drawn clear of the spout, as splashes can cause scalding.

Please note!

"Energy saving" is active, you may have to wait a few seconds

before

steam is delivered.

12.1 Tips for using steam to froth milk

• When choosing the appropriate size of container, remem-

ber that the liquid will double or triple in volume.

• For a richer and denser froth, use skimmed or partially

skimmed milk from the refrigerator (about 5°C).

• For a creamier froth, swirl the container slowly, moving it

from the bottom upwards.

• To avoid producing milk with poor froth or large bubbles,

always clean the spout (E) as described in the following

section.

12.2 Cleaning the hot water/steam spout after

use

Always clean the hot water/steam spout (E) after use to avoid the

build-up of milk residues and prevent it from clogging.

lace

a container under the hot water/steam spout

and de-

liver a little water (see section “11. Delivering hot water

”). Stop delivery of hot water by pressing "Stop";

2. Wait a few minutes for the hot water/steam spout to cool

down, then extract (g. 21) by pressing the release button

(E3);

3. Turn the connector (E2) clockwise and extract (g. 30);

4. Hold the spout (E1) with one hand and with the other, turn

the cappuccino maker (E5) and pull it downwards (g. 31).

Also remove the steam connection nozzle (E4) by pulling

it downwards;

5. Check the hole in the connection nozzle is not blocked. If

necessary, clean using a toothpick.

6. Wash all components of the spout thoroughly with a

sponge and warm water. Use the tube brush (C7) to scrape

o any milk residues.

7. Replace all the spout components correctly.

13. GUIDED BEVERAGE CUSTOMISATION MY

You can use this function to customise all beverages with the

MY symbol at the bottom of the image in beverage settings

(on the homepage (B), press at the bottom of the image

corresponding to the required beverage). To customise, proceed

as follows:

1. Make sure the prole (B2) for which you want to customise

the beverage is active;

2. Press (B5) at the bottom of the image corresponding

to the desired beverage;

3. Press at the bottom of the image corresponding to the

beverage;

4. Press "OK" to follow the guided procedure;

5. Select your preference and press "Next" to move on to the

next step (or "Back" to go back to the previous screen);

6. Press "OK" to begin delivery;

7. Preparation begins and the appliance displays the quanti-

ty customising screen in the form of a vertical bar (in the

case of beverages with milk and coee, customise both

ingredients).

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

DeLonghi Maestosa - EPAM960.55 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van DeLonghi Maestosa - EPAM960.55

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info