687415
13
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
12
3. Press OK (B3) to conrm and select the required item with
the selection arrows. Then follow the instructions for each
setting.
Set temperature:
To modify the temperature of the water used to make the coee,
proceed as follows:
4. Press OK (B3). The current value appears on the display
(B1) and the "New" value ashes;
5. Select the new value you want to set using the selection
arrows (B2 or B4);
6. When the required value (low, medium, high, maximum)
has been selected, press OK.
The display goes back to the previous screen.
Water hardness:
For instructions on identifying and setting water hardness, see
section “15. Setting water hardness”.
• Auto-o (standby):
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours
4. Press OK. The current value appears on the display (B1) and
the "New" value ashes;
5. Select the new value you want to set using the selection
arrows (B2 or B4);
6. When the required time has been selected, press OK.
The display goes back to the previous screen.
Energy saving:
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
4. Press OK. The current state ("Enabled" or "Disabled") and
the operation to be performed ("Disable?" or "Enable?") is
displayed. Press OK to conrm;
5. Press OK to disable or enable the function.
The display goes back to the previous screen.
Please note!
when the function is enabled, the "ECO" symbol appears
on the display.
When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk-based coee is deliv-
ered as the appliance must heat up again.
• Beep:
Use this function to enable or disable the beep. Proceed as
follows:
4. Press OK. The current state ("Enabled" or "Disabled") and
the operation to be performed ("Disable?" or "Enable?") is
displayed. Press OK to conrm;
5. Press OK to disable or enable the function.
The display goes back to the previous screen.
Default beverages:
Use this function to reset the default values for all the beverag-
es, or the individual beverages programmed previously. Select
the beverage, then proceed as follows:
4. Select "All" to reset the aroma and quantity settings to the
default values, or select the required beverage, then press
OK;
5. "Reset?": to reset the default values, press OK.
6. "Reset complete": the appliance conrms the reset and
goes back to the previous screen.
To reset another beverage, repeat from point 4 or to exit, press
/ESC (B5).
Default values:
Use this function to reset all the appliance and beverage set-
tings (apart from the language which remains as selected the
rst time the appliance was used). Select the item, then proceed
as follows:
4. "Reset?"; press OK;
5. "Reset complete": the appliance conrms the reset and
goes back to the previous screen.
To exit, press /ESC (B5).
8.7 Statistics
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press (B5) to enter the "Settings" menu;
2. Press the selection arrows (B2 and B4) until "Statistics" is
displayed between the two dotted lines;
3. Press OK (B3): statistics on the appliance are displayed, use
the selection arrows to scroll through the items;
4. Then press /ESC (B5) to exit.
To go back to the main screen, press /ESC.
9. MAKING COFFEE
9.1 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by calibrating
the coee grinding using the adjustment dial (A5) (g. 6).
Please note:
The grinding adjustment dial must only be turned when the
coee mill is in operation.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

DeLonghi-Dinamica-ECAM-350.35

Zoeken resetten

  • De laaste 3 lamptjes Branden en ik kan voor de rest niks indruken om hem weer aan werk te krijgen en dat na iets Meer dan een half jaar mag hij nog niet stuk zijn toch Gesteld op 20-1-2024 om 13:56

    Reageer op deze vraag Misbruik melden
  • Jai casser la languette support qui est fixé en bas et à droite derrière le réservoir deau de la machine Delongui type 23.120.sb Gesteld op 4-11-2020 om 09:46

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeLonghi Dinamica ECAM 350.35 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeLonghi Dinamica ECAM 350.35 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DeLonghi Dinamica ECAM 350.35

DeLonghi Dinamica ECAM 350.35 Gebruiksaanwijzing - Nederlands - 19 pagina's

DeLonghi Dinamica ECAM 350.35 Gebruiksaanwijzing - Deutsch - 22 pagina's

DeLonghi Dinamica ECAM 350.35 Gebruiksaanwijzing - Français - 19 pagina's

DeLonghi Dinamica ECAM 350.35 Gebruiksaanwijzing - Italiano - 25 pagina's

DeLonghi Dinamica ECAM 350.35 Gebruiksaanwijzing - Espanõl - 18 pagina's

DeLonghi Dinamica ECAM 350.35 Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info