Présentation de votre lave-vaisselle
33
What to do before using the machine for the first time
③③
Filling the regenerating salt reservoir
You must fill this just before starting
your first wash.
Filling with salt is essential to obtain a good
wash with no streaks. The salt regener-
ates the resins, which soften the water by
removing its limestone content unless the
water is already sufficiently soft (see
Adjusting the water softener).
Salt reservoir
Should any regenerating salt overflow when filling,
we recommend that you remove the loose salt crystals
to avoid oxidising the tub.
Never put deter-
gent in this reservoir:
this will ruin the water sof-
tener.
- Unscrew the salt reservoirs stopper and
remove it.
- Use the funnel to introduce the salt.
- Fill the reservoir with regenerating salt
specially designed for dishwashers.
- On the first time, add water
until it reaches the edge
of the reservoir.
- Screw the salt reservoirs stop
back in fully.
Indication of the level of
regenerating salt
SALT indicator light:
This illuminates when you must
add salt. After you have refilled
the salt reservoir, the may still
remain lit until the salt has dis-
solved sufficiently, generally after
one cycle (or if the reservoir has
not been completely filled, for
instance when putting the
machine into operating using the
sample.
SEL
Do not use kitchen
salt.
If the water is especial-
ly soft and does not require
the use of any regenerating salt, the
SALT light remains lit.
